News PIC projects
- ajay_bhargav
- Mon Nov 23 2009, 06:35 pm
Many times people have asked me if its possible to make an RFID reader, I said yes but its complicated and recommend go for an RFID module instead. The complication includes not only the hardware but also the software part. The project utilizes a PIC16F628A with an on-chip comparator in order to feed the output from the op-amp directly into the PIC and extract the digital signal from an RFID card reader.
RFID Reader using PIC Microcontroller
The use of PIC16F628A is for more efficient signal reading by using interrupt based compare capture module since it is provides 150kHz carrier signal generation. Changing the values of capacitance causes the frequency of the entire system to be fine tuned. This is made possible using the function generator to sweep for the peak output observed with the scope where the capacitor size is altered until the peak response of the resonance circuit is at 150kHz.
The op-amp used in the project is TL062 with a simple diode detector. The detected voltage goes through the first op-amp configured as an inverting amplifier with low pass frequency response which will remove bulk of the carrier frequency. Extracting the FSK signal is the next stage of analog circuit which is a resonant band pass circuit with a center frequency.
The capture hardware shares resources with the PWM module that generates the 150kHz carrier signal, and only one function activates at a time.
For complete information on this project Read More here
RFID Reader using PIC Microcontroller
The use of PIC16F628A is for more efficient signal reading by using interrupt based compare capture module since it is provides 150kHz carrier signal generation. Changing the values of capacitance causes the frequency of the entire system to be fine tuned. This is made possible using the function generator to sweep for the peak output observed with the scope where the capacitor size is altered until the peak response of the resonance circuit is at 150kHz.
The op-amp used in the project is TL062 with a simple diode detector. The detected voltage goes through the first op-amp configured as an inverting amplifier with low pass frequency response which will remove bulk of the carrier frequency. Extracting the FSK signal is the next stage of analog circuit which is a resonant band pass circuit with a center frequency.
The capture hardware shares resources with the PWM module that generates the 150kHz carrier signal, and only one function activates at a time.
For complete information on this project Read More here
Comments
Submit comment
Downloads
- Automatic Railway Gate Control by: Sharanjit Singh in: 8051 Projects
Tue Oct 15 2019, 12:47 pm - Yet Another DTMF Controlled Robot by: Er. Sharanjit Singh in: 8051 Projects
Tue May 07 2019, 02:45 pm - Simple 3 Digit Temperature Meter by: Rakesh Suthar in: PIC Projects
Sat Jul 05 2014, 11:45 am - Electronic Voting machine with Managed Control Unit (Project Report Included) by: Shivani, Geetika Gupta, Vibhore Aggarwal, Megha Singh in: 8051 Projects
Sat May 17 2014, 07:46 pm - LED Scrolling message Display using 8051 by: Pratik Suthar in: 8051 Projects
Thu May 08 2014, 04:28 pm
Comments
- Pure Sine Wave Inverter Using Atmel 89S2051 by: Anthonyvab
Wed Apr 17 2024, 08:51 am - Pure Sine Wave Inverter Using Atmel 89S2051 by: Jerrydauck
Fri Mar 01 2024, 08:51 am - Pure Sine Wave Inverter Using Atmel 89S2051 by: DennisVatry
Thu Feb 22 2024, 10:04 pm - Pure Sine Wave Inverter Using Atmel 89S2051 by: DonaldPaids
Thu Feb 22 2024, 03:45 pm - Pure Sine Wave Inverter Using Atmel 89S2051 by: Victornwh
Mon Feb 19 2024, 12:01 pm
KevinTab
Sun Apr 28 2024, 05:35 am
Tumergix
Sun Apr 28 2024, 12:59 am
StevenDrulk
Sat Apr 27 2024, 08:47 pm
StephenHauct
Sat Apr 27 2024, 09:38 am
Adamsaf
Sat Apr 27 2024, 07:12 am
Robertphype
Sat Apr 27 2024, 12:23 am
ktaletrryp
Fri Apr 26 2024, 10:55 pm
Robertrip
Fri Apr 26 2024, 11:20 am
Trending Topics
MOSFETs analog and mixed-signal extensions keil debugger logic analyzer rar BLDC motor connection ckt atmel microcontrollers port address fire fighting robot SEF plugin e107 ARM-based system DSP tone generation 8051 proteus pspice simulator download distribution transformers happy new year FieldBus standards CadSoft Eagle Professional 6.2.0 Process Engineering Design Using Visual Basic 8051 bluetooth control
I think above download links are not working. Can you please check.
Thanks
Kiran