Basic Level     Skills: Not specified    
Author
Author email
[email protected]
Author website
www.binu.somee.com

Description

Project not tested

This Project takes over the task of Ringing of the Bell in Colleges. It replaces the Manual Switching of the Bell in the College. It has an Inbuilt Real Time Clock (DS1307) which track over the Real Time. When this time Equals to the Bell Ringing time, then the Relay for the Bell is switched On. The Bell Ringing time can be Edited at any Time, so that it can be used at Normal Class Timings as well as Exam Times. The Real Time Clock is displayed on four 7-segment display. The Microcontroller AT89S8252 is used to control all the Functions, it get the time through the keypad and store it in its Memory. And when the Real time and Bell time get equal then the Bell is switched on for a predetermined time.
  Filesize

34.46 kB

  Downloads

41672

  Rating
 

Comments

(Required; Min length 5)
(Required; will not be displayed)

Conversation

Wed Jul 29 2015, 06:42 PM
Muhammad Aarshad
Hello I want to build it, but I don't know how can I program the micro controller. Can You send me the code of the IC? Thanks in advance My e-mail: [email protected]
Sat Jul 25 2015, 10:37 PM
Arnali
What does the cross means? The ones from pin 7,8,9,10 of the LCD?
Fri Jul 24 2015, 09:53 AM
HARSHAL PATIL
....
shyam
Thu Jul 23 2015, 01:42 PM
hi Ajay
ajay_bhargav
Mon Jul 20 2015, 04:38 AM
@Rohit Biradar, I am glad my tutorial helped
Thu Jul 16 2015, 06:19 PM
Rohit Biradar
Thanks a lot publisher of this tutorial. Everybody tells about the nibble sending methods and the command set for 4-wire lcd interface. You are the first to tell me about the most important part that is resetting the lcd. This thing got me all day. Now I can sleep in peace. Thanks once again. Million thanks.
Thu Jul 16 2015, 12:24 PM
Baby
my project is related to control the door in dam. by keil program how can i control the same.
Thu Jul 16 2015, 09:12 AM
rutuja
plzzz giveme more details about this project.if i want to type any words then how it will be happen bcoz no more letters are on remote.suggest about it
Sat Jul 11 2015, 09:55 AM
Abhijit Deshmukh
ok
Wed Jul 01 2015, 05:14 PM
ShubhamBansal1996
i am making a project of connecting 4 8051's using a can bus for which i am using mcp2515 and mcp2551.but before making it i want to ensure it works by simulating it on proteus though the two ic's mentioned above dont seem to have models in proteus so is there anyone who can help me with that

Downloads

Comments

KDN
Wed Jul 29 2015, 05:14 AM
Tanvir.
Fri Jul 24 2015, 07:59 AM
erummumtaz
Thu Jul 23 2015, 10:47 PM
balvant
Thu Jul 16 2015, 03:56 PM
seoulmak
Mon Jul 13 2015, 01:21 PM
SHIVKHUMAR
Sat Jul 11 2015, 04:10 AM
Nals99
Fri Jul 03 2015, 08:33 AM
Mc_Comet32
Thu Jun 25 2015, 11:42 AM

Online

Guests: 47, Members: 0 ...

most ever online: 182184
(Members: , Guests: 182184) on 06 Aug 2010: 05:37 AM

Members: 37678
Newest member: KDN
Forum Activity
Mc_Comet32 Avatar
Posted By Mc_Comet32
Sun Jul 26 2015, 05:49 PM
ExperimenterUK Avatar
Posted By ExperimenterUK
Thu Jul 23 2015, 08:14 PM
Try this link.Basically find the tacho output pin...
seoulmak Avatar
Posted By seoulmak
Mon Jul 20 2015, 03:44 PM
ajay_bhargav Avatar
Posted By ajay_bhargav
Mon Jul 20 2015, 04:42 AM
Ok then, check if you did not mention "LCD_ClearSc...
ajay_bhargav Avatar
Posted By ajay_bhargav
Mon Jul 20 2015, 04:41 AM
I am assuming you're talking about the small CPU f...
ajay_bhargav Avatar
Posted By ajay_bhargav
Mon Jul 20 2015, 04:36 AM
Amit Kumar Das Avatar
Posted By Amit Kumar Das
Sun Jul 19 2015, 04:17 AM
Yes they are fine. I have included everything. Una...
seoulmak Avatar
Posted By seoulmak
Fri Jul 17 2015, 08:41 AM
yes, but i need more information to connect the f...
balvant Avatar
Posted By balvant
Thu Jul 16 2015, 04:07 PM
ExperimenterUK Avatar
Posted By ExperimenterUK
Wed Jul 15 2015, 05:42 PM
Is this a project listed on this site ?