Basic Level     Skills: Not specified    
Author
Author email
[email protected]
Author website
www.binu.somee.com

Description

Project not tested

In spite of the improvement of communication link and despite all progress in advanced communication technologies, there are still very few functioning commercial wireless monitoring systems, which are most off-line, and there are still a number of issues to deal with.

Therefore, there is a strong need for investigating the possibility of design and implementation of an interactive real-time wireless communication system. In our project, a generic real-time wireless communication system was designed and developed for short and long term remote patient-monitoring applying wireless protocol. The primary function of this system is to monitor the temperature and Heart Beat of the Patient and the Data collected by the sensors are sent to the Microcontroller. The Microcontroller transmits the data over the air.

At the receiving end a receiver is used to receive the data and it is decoded and fed to Microcontroller, which is then displayed over the LCD display. If there is a dangerous change in patient's status an alarm is also sounded.
  Filesize

52.32 kB

  Downloads

38622

  Rating
 

Comments

AMIAKA
05 Dec 2012: 11:51 AM
GUD
  
(Required; Min length 5)
(Required; will not be displayed)

Conversation

ExperimenterUK
Tue Jun 30 2015, 05:24 PM
@sachinmm The 8051 timer can't do 1 second. It can do 50ms so count 20 times
sachinmm
Sat Jun 27 2015, 05:01 AM
how calculate 1 second delay in 8051 by using timer and what value should be store in TH0 & TLO register??
sachinmm
Fri Jun 26 2015, 08:25 AM
hello sir plz tell me how to know the 74HC165 parallel in serial out ic is fauty or not?
Wed Jun 24 2015, 08:24 AM
ben mutuku
How can one use XOR gate to ensure the first output is '1' and the next is '0'?
ExperimenterUK
Wed Jun 17 2015, 01:37 AM
@baz..try adding a hash and a semi colon
Sun Jun 14 2015, 06:31 AM
baz
@ExperimenterUK no..i dont do that i just type message example.. Hello my name is baz and then i click send message,
ExperimenterUK
Sun Jun 14 2015, 01:55 AM
@baz..did you end your message with a hash and a semi colon
Sat Jun 13 2015, 06:48 PM
asif Jamadar
I want the program for v/f control technique of 3 phase induction motor
Sat Jun 13 2015, 07:06 AM
baz
@ExperimenterUK okay thank you...but now I already complete and my dot matrix already light up but when i send message from pc to my hardware project it doesnt show any message on my dot matrix..its only blinking when i click send message....I really dont know whats the problem...I had follow all the steps...schematic and use the coding that have been provided..is it because firstly i had wrong burn the coding in AT24C16?? Is that effect ????
ExperimenterUK
Sat Jun 13 2015, 12:08 AM
@baz Load the hex file into the at89c52, The at24c16 holds the message to display

Downloads

Comments

Mc_Comet32
Thu Jun 25 2015, 11:42 AM
yashaswi
Thu Jun 25 2015, 05:56 AM
Riki-cc
Tue Jun 23 2015, 10:48 AM
PadRlp
Thu Jun 18 2015, 02:11 PM
start
Thu Jun 18 2015, 01:30 PM
sheilabajos
Tue Jun 09 2015, 03:35 PM
martintan
Tue Jun 09 2015, 12:08 AM
karra.vnr
Tue Jun 02 2015, 03:41 PM

Online

Guests: 31, Members: 0 ...

most ever online: 182184
(Members: , Guests: 182184) on 06 Aug 2010: 05:37 AM

Members: 37671
Newest member: Mc_Comet32
Forum Activity
ExperimenterUK Avatar
Posted By ExperimenterUK
Tue Jun 30 2015, 05:45 PM
The 8051 timer can't do 1 second. It can do 50ms, ...
ExperimenterUK Avatar
Posted By ExperimenterUK
Tue Jun 30 2015, 05:38 PM
Debugging is the process of finding out why your ...
ExperimenterUK Avatar
Posted By ExperimenterUK
Tue Jun 30 2015, 05:21 PM
You may have misunderstood some of the terms used....
Amit Kumar Das Avatar
Posted By Amit Kumar Das
Mon Jun 29 2015, 06:03 PM
Suppose the ILI9320 TFT LSB & MSB pins are con...
prajwalsnh Avatar
Posted By prajwalsnh
Mon Jun 29 2015, 03:39 PM
Hello everyone,I wanted to know the basics of debu...
prajwalsnh Avatar
Posted By prajwalsnh
Mon Jun 29 2015, 03:28 PM
Hello all,I wanted to know which is the default co...
vipinpathakg Avatar
Posted By vipinpathakg
Sun Jun 28 2015, 12:57 AM
Three letters E,Z and I displaying completely but...
pravin_35 Avatar
Posted By pravin_35
Sat Jun 27 2015, 06:19 AM
Thanks ajay and Exp uk...i thought of getting Micr...
sachinmm Avatar
Posted By sachinmm
Sat Jun 27 2015, 05:09 AM
how calculate 1 second delay in 8051 by using time...
mayank058 Avatar
Posted By mayank058
Fri Jun 26 2015, 10:00 AM
dear Sir, This program is working on ...