Basic Level     Skills: Not specified    
Author email
[email protected]
Author website


This project aimed to develop a wireless system to detect and allow only the authorized persons. The system was based on Radio Frequency Identification (RFID) technology and consists of a passive RFID tag. The passive micro transponder tag collects power from the 125 KHz magnetic field generated by the base station, gathers information about the Tag ID and sends this information to the base station. The base station receives, decodes and checks the information available in its Database and Manchester code was used to send those information. The system performed as desired with a 10cm diameter antenna attached to the transponder. The Base Station is built by using the Popular 8051 family Microcontroller. It gets the tag ID and if the tag ID is stored in its memory then the microcontroller will allow the person inside.
RFID Reader Module, are also called as interrogators. They convert radio waves returned from the RFID tag into a form that can be passed on to Controllers, which can make use of it. RFID tags and readers have to be tuned to the same frequency in order to communicate. RFID systems use many different frequencies, but the most common and widely used Reader frequency is 125 KHz.

112.39 kB





(Required; Min length 5)
(Required; will not be displayed)


Tue Oct 06 2015, 08:22 AM
HI you looking for ideas or you have solution
Fri Oct 02 2015, 03:39 PM
poojitha: projects on wireless communication between two microcontrollers
Thu Oct 01 2015, 04:38 PM
hey! i wanted to simulate my circit using proteus. i have a sugar cube relay in my circuit....but i dont know which one is that in the device libraries of the software. any help? thankyou.
Tue Sep 29 2015, 09:40 PM
@Michal, that rocket is too heavy for itself and trust is not enough unless afterburners are fed with fuel properly.
Sat Sep 26 2015, 08:19 PM
Hello, its possible to make a amateur rocket with this engine, or something simillar, which be able to flight?
Thu Sep 24 2015, 10:38 AM
Ir Switch sir.
Wed Sep 23 2015, 01:10 AM
@engr1931 which project ?
Tue Sep 22 2015, 11:57 AM
Hello sir, is it ok to use 12.000MHz oscillator in IRswitch, because the requirement written in the post is 11.059MHz. And i use PIC1018 as an Ir receiver
Mon Sep 21 2015, 04:15 PM
Hello sir, your blog is kind of helpful for us especially students. May I know do you have the coding for decimal to binary using proteus 8. My mini project is about to convert decimal to binary just like a calculator. The output is LCD. A bit confusing is the decimal to binary coding on proteus 8. pls help thanks.
Sun Sep 20 2015, 09:08 PM
Have you searched our Embedded GSM Development and GSM and CDMA Discussion forums ?



Tue Oct 06 2015, 01:02 PM
Fri Oct 02 2015, 03:28 PM
Sat Sep 26 2015, 01:26 AM
Fri Sep 25 2015, 10:57 AM
Wed Sep 23 2015, 08:13 PM
Wed Sep 16 2015, 04:55 AM
Mon Sep 14 2015, 03:06 PM
Fri Sep 11 2015, 06:03 AM


Guests: 60, Members: 0 ...

most ever online: 182184
(Members: , Guests: 182184) on 06 Aug 2010: 05:37 AM

Members: 37698
Newest member: praveenraoms
Forum Activity
praveenraoms Avatar
Posted By praveenraoms
Tue Oct 06 2015, 01:06 PM
hi i want to know the code to access the geographi...
sachinmm Avatar
Posted By sachinmm
Wed Sep 30 2015, 08:54 AM
how to used polling method in this?? my code is co...
ajay_bhargav Avatar
Posted By ajay_bhargav
Tue Sep 29 2015, 09:39 PM
__irq is just compiler directive to wrap IRQ routi...
ajay_bhargav Avatar
Posted By ajay_bhargav
Tue Sep 29 2015, 09:36 PM
The comment does say the time values as per the th...
ajay_bhargav Avatar
Posted By ajay_bhargav
Tue Sep 29 2015, 09:33 PM
are you testing this on Proteus? or MplabX simulat...
ajay_bhargav Avatar
Posted By ajay_bhargav
Tue Sep 29 2015, 09:31 PM
[Topic moved to ARM Development Forum]
ajay_bhargav Avatar
Posted By ajay_bhargav
Tue Sep 29 2015, 09:29 PM
start with reading datasheet. SPI interface on LPC...
ajay_bhargav Avatar
Posted By ajay_bhargav
Tue Sep 29 2015, 09:27 PM
I am not sure you've solved it or not but "USARTRe...
ExperimenterUK Avatar
Posted By ExperimenterUK
Tue Sep 29 2015, 06:31 PM
i am confused in "__irq" it is uesd??sachin...
sachinmm Avatar
Posted By sachinmm
Tue Sep 29 2015, 11:11 AM
my I2C.c file=>>/*********************************...