Basic Level     Skills: Not specified    
Author
Author website
www.gkselectronics.blogspot.com

Description

GSM Controlled Robot (with project report)


we already had a great start of this year with PIC Industrial and Domestic Timer project but that is not all for this year I received one more project today
Tags gsm controlled robotcellphone controlled robotdtmf decoderdtmf controlled robot
  Filesize

1.01 MB

  Downloads

193938

  Rating
 

Comments

majoka
10 Jan 2011: 00:11 AM
nice work guys
pcb is fine
  
Anonymous
13 Jan 2011: 04:57 AM
Well nicely built project.

But it is fully pirated project from Electronics for you see here

kitsnspares.com/admin/pdffiles/Cellphone_Land%20Rover.pdf

This sort of work should not be accepted by this great site admin.
Totally theft from EFY all circuit,code and PCB too. Author rubbed off PCB makers name also.

Well whole responsibility is of author.

Please try to submit your own projects.

Thanks.
  
ajay_bhargav
14 Jan 2011: 13:25 PM
I appreciate your comment, even though i knew this was made from EFY coz the cricuit diagram shows that. But one should never forget the personal efforts done to make this project, By just seeing a project you cannot say it will work or it works. These guys put their effort to make that project, validate its working. write project report on it which is not from EFY am i right so they have done their part of job and I am happy they have shared it with everyone.

Lets not forget you might have come here to download a project or what? or If you think you are better than these guys share your work with us. I would be glad to host it on this website.

Remember Making a project does not mean stealing it, in a better way we call it Improvising.
  
jeswanthmg
15 Jan 2011: 08:37 AM
well said ajay sir i have seen so many guys telling the same things like when i first constructed my first circuit which was CLAP OPERATED SWITCH from efy magazine my friends just commented that whats there in that just copy paste but only a true passionate can appreciate it and understand the efforts put into it.
  
ajay_bhargav
15 Jan 2011: 14:43 PM
People always forget the effort one has to put when making a project. There is a lot of learning curves exist in every project no matter you designed it yourself or not.

I always appreciate who so every try to learn things from whatever available. I myself learn this way so i want everyone to try and learn. unless you do things you wont learn.
  
Anonymous
16 Jan 2011: 06:09 AM

Hello ajay,

Nice to get comment on my post. Thanks for not deleting it.

It is not acceptable till the end of the earth that a person steals someone others content and being so smart by erasing their name from PCB. By accepting such projects you are promoting pirates.

Author must mention the original creators name whenever he/she uses their content. like you have done with binu's projects.

I know no one makes their first projects at their own. we all gain knowledge from making available projects.

It is very sad that instead of accepting the mistake you are challenging me to prove my ability.

I promise whenever i submit my project it will be done fully by me especially PCB layout and circuit.
  
jeswanthmg
16 Jan 2011: 12:10 PM
@Anonymous
yep i did not notice that they have erased the name from PCB that's bad i think Ajay also had not noticed it i think its just beginner's mistake
they must have taught that they don't get appreciation if they put the source of inspiration he he
  
Anonymous
16 Jan 2011: 13:08 PM
Hi jeswanth

Thanks for comment.

I am not willing to discourage someones efforts i just want to say the author that always respect someones creation.

"i think its just beginner's mistake" he he hoo hoo

  
ajay_bhargav
17 Jan 2011: 12:47 PM
@Anonymous

why being anonymous? afraid? or jealous? seems like you are friend of these kids and just taking your frustration out for some reason

anyways they are college students and i think if i were at their place (imagine yourself as a student in a polytechnic college) i would have done the same or i wont get marks

Understand the fact that being in Polytechnic college they have done enough work. atleast showing courage to do a project on their own by whatever means available is appreciable to me.

I would be gald to see your project on this website. For now i would appreciate if you reveal yourself if you're not afraid. as i am not afraid to delete your posts
  
Anonymous
17 Jan 2011: 14:05 PM
Instead of accepting my point you are still busy in challenging me. I just want to say there is no need to erase the name on PCB.

Now i am coming on being anonymous. There is no problem in singing in with a name because there is no user verification system.

Ajay i am a big fan of you as you are idol for most of us. But everyone who is reading these posts will be disappointed with your answers.

Ok ajay i have given up. You won.





  
gaurav.k
18 Jan 2011: 13:18 PM
rubbing the name was a college demend

  
gaurav.k
18 Jan 2011: 13:25 PM
till now no one have WON in ELECTRONICS field

coz ''ELECTRONICS IT SELF IS A CHALLENGING FIELD''
  
gaurav.k
18 Jan 2011: 13:33 PM
THANK U for encouraging me for making more projects on my on
  
gaurav.k
18 Jan 2011: 13:34 PM
every beginner should make mistake to gain knowledge
  
gaurav.k
18 Jan 2011: 13:47 PM
I don't care wht any one say for me

i subbmited this project coz
my aim is to do some contribution in electronics field

  
gaurav.k
18 Jan 2011: 13:56 PM
MY college staff Appreciated my work and selected my project first

and only me was the student to satisfied teachers request in the project work

this was accepted by my class peoples too

coz they know how i work on the project and project was made with less cost as compared with kits and spare cost
my cost 1500 and their more then 2500

BUT I M HAPPY THAT I HAVE LEARN SOME THING FROM THE DISCUSSION ABOVE
  
Anonymous
18 Jan 2011: 22:37 PM
Hi everyone,
I am 57 year young person with 0ver 25 years Experience in the field of electronics and instrumentation.The magazine referred by anonymous itself uses articles copied verbatim from foreign magazines. I have gone thru' the project report and gaurav mentions the credits in bibliography.I hope that this anonymous person tries to construct a project without mistakes/errors the first time(may not necessarily be the first project) copied or otherwise.
Gaurav, Keep up the good job try to analyse the concept and tinker to learn more.All the best.
P.S. This does not mean I support copying,but the best way to learn is by copying and tinkering with the circuits.Even the so called designers use reference circuits provided by the manufacturers to encourage the sale of their product.
  
gaurav.k
19 Jan 2011: 01:26 AM
sir u r 57 yr young person and yes u r coz u have 25 yr of expericnce

U r right the magzine have some copied articles in their issus i have idea about it

i have mentions the credits in bibliography of 6 or 7 sites
coz it was college demend and i have set the report according to the guielines of college

Thank u sir for guiding me in u r last 2 sentenses
  
moneybond
19 Jan 2011: 04:13 AM
Dear Gaurav
I am not the anonymous Guest who posted the following,I just failed to Login

Well nicely built project.

But it is fully pirated project from Electronics for you see here

kitsnspares.com/admin/pdffiles/Cellphone_Land%20Rover.pdf

This sort of work should not be accepted by this great site admin.
Totally theft from EFY all circuit,code and PCB too. Author rubbed off PCB makers name also.

Well whole responsibility is of author.

Please try to submit your own projects.

Anonymous



I am reposting my comments

Hi everyone,
I am 57 year young person with 0ver 25 years Experience in the field of electronics and instrumentation.The magazine referred by anonymous itself uses articles copied verbatim from foreign magazines. I have gone thru' the project report and gaurav mentions the credits in bibliography.I hope that this anonymous person tries to construct a project without mistakes/errors the first time(may not necessarily be the first project) copied or otherwise.
Gaurav, Keep up the good job try to analyse the concept and tinker to learn more.All the best.
P.S. This does not mean I support copying,but the best way to learn is by copying and tinkering with the circuits.Even the so called designers use reference circuits provided by the manufacturers to encourage the sale of their product.
Mohan
  
ajay_bhargav
21 Jan 2011: 10:53 AM
Thanks for encouraging

I edited your comment to highlight the quoted part.
  
majoka
21 Jan 2011: 12:21 PM
let cool guys
  
navya
22 Jan 2011: 06:17 AM
it is very nice.........
can u send me more details about it to my mail id
my mail id is navya.teja69@gmail.com
plzzzzzzzzzzzzzz
  
navya
22 Jan 2011: 06:23 AM
its nice sir.........
can u send me the details of this project work to my mail.
my mail id is navya.teja69@gmail.com
plzzzzzzzzzzzzzzz sir
  
Gurmeet
30 Jan 2011: 11:10 AM
its nice sir.........
can u send me the details of this project work to my mail.
my mail id is gurmeetpannu@rocketmail.com
plzzzzzzzzzzzzzzz sir
  
bhoomisjoshi
02 Mar 2011: 08:16 AM
can i use other mobiles like nokia 1600 instead of nokia 1100 at the receiver side?? plz reply today
  
bhaskarsamas
04 Mar 2011: 02:44 AM
i have used 9370 ic instead of 8870. and i did the connections up to 8870. i haven't placed NOT gate and micro controller. I connected those 9370 outputs to the LED's but i didn't get any output
  
sunhawy
12 Mar 2011: 06:22 AM
HI AJAY great work i am doing my graduation project its is (an automatic wheel chair based on speech recognition) can you help me plz by telling me which microcontroller i shall use and if you had any code for it thank you very match i appreciate you work and your help .
  
ravitejamandiga
06 May 2011: 02:48 AM
can you pls explain whch software is used to dump the code in to MC...
n i shwd more interst towrds this pro ...plz send me some more details about this project to my mail - mandigart@yahoo.com plzzz
  
true guy
18 Jun 2011: 05:23 AM
you are really true
  
Anonymous
13 Sep 2011: 02:41 AM
woo........
this is not a competition going on here....
just share and learn............
no circuits come from sky..
one has to dwell on existing projects,
observe,
build
and
by being familiarised to those results in a new creation.........
well done gourav........ dont lose spirit from these remarks
  
prashantkumar2806
09 Oct 2011: 08:46 AM
plz tell me the mosfect no which is used in gsm cellphone controlled robot?????
  
ccdsiu
13 Oct 2011: 10:06 AM
can we do it with ATIMEGA8 board
  
mtalsania
22 Oct 2011: 12:50 PM
hey man awesome project... hey can u plz send me more details about this ...can u send me component layout and component placement on the pcb layout shown...also i would like to know abt whci cell phone is to be used ???.. u may also send similar robotics and muc based projects... plz mail me at talsaniamihir@yahoo.co.in.. thanx
plz reply asap
  
shubhangi.g34@gmail.com
09 Nov 2011: 00:25 AM
tell me the application of this project . reply fast
  
umang
08 Jan 2012: 05:50 AM
plz send me assembly code of this on umangd35@gmail.com
  
saiscool18@gmail.com
24 Jan 2012: 06:25 AM
hey man excellent project... hey can u plz send me more details about this... & plz send me component layout and component placement on the pcb layout shown...also i would like to know abt whci cell phone is to be used ??
i also need the program for the controller plz reply me fast...
or mail me to saiscool18@gmail.com
  
ajay_bhargav
24 Jan 2012: 12:32 PM
everything is there in zip file.. just download it. and regarding mobile phone, i think its Nokia 1100 but i believe any phone with mic input can be used.. just check the project documents.
  
Hiren Rathi
13 Feb 2012: 02:50 AM
[[b]]Hi! congratulation 4 making this robot. i like this .How to make it & what is its mechanism
  
Hiren Rathi
13 Feb 2012: 02:56 AM
[[b]]Hi! congratulation 4 making this robot. i like this .How to make it & what is its mechanism? hirenrathi@gmail.com
  
pooja brar
15 May 2012: 00:45 AM
hiii its such a amazing project..............and me nd my friend's also going to wrkk on disssssssss..........
  
pratikraje
19 May 2012: 09:41 AM
plz can u tell me
how many connection are ter on the top view of the PCB
i thnik 1 for the motor
1 for headphones
1 for battery and...????????
  
pratikraje
19 May 2012: 09:50 AM
plz can u tell me
how many connection are ter on the top view of the PCB
i thnik 1 for the motor
1 for headphones
1 for battery and...????????
Reply to this
  
ajay_bhargav
20 May 2012: 12:02 PM
ask your doubts in forum
  
ajay bhaderiya
06 Jul 2012: 11:18 AM
sir can u tell me the coding of dis project in c ....... reply soonnn sir ...ajaybhaderiya@yahoo.com
  
SHAHZAIB
10 Jul 2012: 14:12 PM
HI, CAN U PLZ DELIVER THE CODE IN C LANGUAGE ?I M WAITING FOR UR REPLY ,PLZ REPLY!!!
  
Anonymous
10 Jul 2012: 14:18 PM
with out microcontroller it will not work .The robot is being controlling by gsm and micocontroller dude!
  
ajay_bhargav
11 Jul 2012: 02:08 AM
This project is written in C language, just download it.
  
aloha
13 Jul 2012: 10:31 AM
hi can give me more details about this proj? im thinking of making it..
can mail me more info on my mail. ants_mau@yahoo.com thanks.
or can i just add you on facebook? so i can communicate to you easily thanks
  
robertman
13 Jul 2012: 18:53 PM
thank u for the job well done.please can u send me the assembly version of the code. my E-mail is ezerobert56@yahoo.com. subjection can u modify the system to use it as car tracking system
  
Anonymous
25 Jul 2012: 17:19 PM
hie all,
i want make this project using arduino board. if you give me a quick run through of how it would be done.

Thanks for the help
  
ganesh dv k
12 Oct 2012: 03:55 AM
nice........try
  
ganesh dvk
12 Oct 2012: 03:58 AM
its very useful to embedded freshrs and evrything...ones second..i would say thanks......
  
Anonymous
13 Dec 2012: 05:17 AM
its very good sir...
i m trying the same so it would be helpful if u send ur project to my email address...
amitkmrtripathi@gmail.com
  
SmandyS
07 Feb 2013: 03:09 AM
I fully agrees with Ajay.
well done Gaurav...

i appreciates your efforts.

with Best regards
SmandyS
  
SmandyS
07 Feb 2013: 03:14 AM
1 more thing.

its not called "stealing" as long as you have given credit to the original maker.
  
Anonymous
28 Feb 2013: 02:09 AM
how much is the total cost
plz reply to roshansaji50@gmail.com
  
Anonymous
16 Mar 2013: 09:38 AM
can we use a arduino to make dis robot.. plz reply to rakesh.lead@gmail.com
  
Robogeek
05 Apr 2013: 14:13 PM
Sir, its a fantastic proj. But I am new to this field so I don't know how to make PCBs. I want to make the circuit on Breadboard with the help of your circuit image. But I am unable to get what is TIP and RING on the left side of the Logical circuit Image. Also can u plz giv me some details of building it on Breadboard? Email- soubhikkumardey@yahoo.in
Thank You.
  
ajay_bhargav
10 Apr 2013: 05:54 AM
TIP and RING refers to headphone connector. As you are giving input of headphone to DTMF decoder. Please use forum if you need anymore help.
  
Robogeek
26 Apr 2013: 13:55 PM
Sir I still cannot get the TIP & RING part on the left part of ur LOGICAL CKT. I cut my headphone cord only to find a silk-like wire thread. But what should I connect at TIP & what at RING respectively? The silk-like wire is just a single wire, so what should I separately connect at TIP & RING? Thnx 4 help!
  
Robogeek
26 Apr 2013: 14:04 PM
I like ur project vry much & u cn consider me as ur fan. Sir I want to design a Land rover like u that would be operated using SMS remote control through another mobile using AT command technology. Thinking to use SIM300 as GSM modem, Atmega 16 as MCU. Can u plz help me? Plz if u hv sum idea abt the ckt, components & programming plz help. My email: soubhikkumardey@yahoo.in

I got one such project at
http://www.serasidis.gr/circuits/smscontrol/smscontroller.htm

But I don't hv a Sony Ericson T10 phone. Plz help. Its urgent as I hv to design 2 robots, one by DTMF & the other by SMS remote control.
  
ajay_bhargav
29 Apr 2013: 01:18 AM
Can you please post in forum? whatever problem you have..
  
Gizmo
17 Jun 2013: 09:53 AM
Awesome project!!! Can we use 12 V DC motors and 12 V power supply for this project instead of 6V? PLz reply, its urgent.
  
Go
13 Jul 2013: 07:13 AM
Can someone upload the link to the same project using arduino???
  
(Required; Min length 5)
(Required; will not be displayed)

Downloads

Comments

embeddevil
Thu Apr 17 2014, 08:44 AM
viniciusheidrun
Wed Apr 16 2014, 07:32 AM
Colbee
Tue Apr 15 2014, 04:12 PM
sanket400
Tue Apr 15 2014, 11:21 AM
irfanahmed11
Mon Apr 14 2014, 10:00 PM
my_love
Sun Apr 13 2014, 02:59 PM
manpreet.31
Sun Apr 13 2014, 12:41 PM
anjalibandiya
Sun Apr 13 2014, 09:00 AM

Conversation

Thu Apr 17 2014, 12:27 AM
mba'
like the forum and wish to participate
ExperimenterUK
Wed Apr 16 2014, 04:45 PM
@viniciusheidrun..you should read my comment just before your post
viniciusheidrun
Wed Apr 16 2014, 01:43 PM
I'm doing a drive system with SIM900D modem and microcontroller AT89S52 via sms. I'm having trouble can not generate the. Hex to send to the microcontroller, whenever I compile the error, I'm using MCU 8051 IDE, what should I do so that my system receive sms and perform my task?
ExperimenterUK
Mon Apr 14 2014, 01:00 PM
@Haranadh,bipin chandra etc. Create threads for your questions.
Sun Apr 13 2014, 04:05 AM
Haranadh
we bought HC 06 Bluetooth modem instead of Module ,Can any one help me of using it as bluetooth module since i am doing this project?
Sun Apr 13 2014, 03:58 AM
Haranadh
Hi,Actually we bought Bluetooth modem instead of Bluetooth Module
ajay_bhargav
Sat Apr 12 2014, 02:55 PM
Please use forum if you want to ask a question.
Sat Apr 12 2014, 01:06 PM
Dpk
Hi Ahana,I can Help you on this
Sat Apr 12 2014, 03:51 AM
bipin chandra
can anybody help me. we are making a project to control the position of dc motor. so there we need to interface lcd screen and the 4X3 memberane keypad and a dc motor driver chip. can anybody please give me the complete circuit diagram connection of these components with the 8051.and alse help in the programming. my email id is bipin.chandra666@gmail.com
Fri Apr 11 2014, 01:10 PM
humain
will anybody tell me why do we need comma positions to be considered to know about latitude and longitude from gps?
  Choose Skin