Advanced Level     Skills: Arduino, AVR, GSM, Bluetooth, ADC, Sensors    
Author
Author website
www.gkselectronics.blogspot.com

Description

Smart Home using GSM, Bluetooth and Android



This project demonstrates a Smart home device which can control things automatically by taking decisions based on sensor network or using manual control using your phone over Bluetooth or GSM. Which means if you are inside the house you can use You can control your appliances using bluetooth when outside use your GSM phone (over SMS).



This project uses AVR controller ATMega328 running Arduino firmware. There are a number of sensors connected to the controller some on GPIOs and some via Analog ports. Here is a short list of sensors:
1. Temperature Sensor (LM35)
2. PIR Sensor
3. Light Sensor (LDR)
4. GAS Sensor

Wireless modules used in this project:
1. SIM300 GSM Module (SIM900 can also be used)
2. HC-05 Bluetooth Module

There is also a provision for controlling 4 AC appliances. One LCD is also connected to show real-time status of all the sensors.

This project gives a good hands on practice on AVR controller and Arduino firmware programming. With various communication options one can get good experience on wireless communication. Further more there are endless possibilities of expanding this project. So you really need to turn your brains on and think of what more you can do with this.

Project also includes complete documentation including Synopsis, Project report and final presentation. But don't get carried away with these goodies. Learn and Build this project so it can benefit you in future

I really want to thank Gaurav Khadasane once again for submitting this wonderful project and bringing lot of things together to learn in a single project.

Link to Android Application:


Finally the working Demo:


Tags bluetooth home automationhome automation using gsm modesim900smart home using gsmsmart home project bluetoothandroid controlled smart homehome automation androidPIR sensorLPG gas sensorHC-05 bluetooth module
  Filesize

6.98 MB

  Downloads

105308

  Rating
 

Comments

michael004
26 Jun 2014: 13:06 PM
hi!
can I ask where is the file for the Android part of the project? the code and apk file for the Android cellphone.
  
tapkirvivek
29 Aug 2014: 14:12 PM
hello sir, your report was very helpful. Can you please mail me more detailed work on HC - 05 Data transfer and its I/O configuration
  
asuras
28 Sep 2014: 12:02 PM
can u share for us the file for Android ?
  
ajay_bhargav
01 Oct 2014: 06:03 AM
@asuras I asked Author to provide link to application. I will update this soon.
  
Dutta
12 Oct 2014: 19:04 PM
This guy is liar, this is not using android! can anyone please help me with home automation using GSM and with task scheduling?
  
gaurav.k
04 Nov 2014: 12:54 PM
@dutta....
android...app is used ....here...
n for help on projects please use the FORUM ...accordingly.....

@asuras here is the link...
https://play.google.com/store/apps/details?id=mobi.dzs.android.BluetoothSPP&hl=en
  
Linton
01 Dec 2014: 16:07 PM
sir please code and diagram
  
ajay_bhargav
02 Dec 2014: 05:31 AM
@Linton, just clock the download file button.
  
debasish
23 Jan 2015: 18:48 PM
sir
plz kindly help me how to interface gsm module with mc .i'll pay for that.plz cont in this no [blocked] or mail---debasish.mahakud[at]gmail[dot]com
  
Gursewak
02 Apr 2015: 09:10 AM
Sir,
I have Hc-06 module, will it work with this project?
thank you!
  
ajay_bhargav
03 Apr 2015: 11:27 AM
@Gursewak, Yes it will work.
  
Hafiz Muhammad Azeem tariq
20 Apr 2015: 09:24 AM
AOA.
sir i read your full pdf file i sellect this project for final year this feild is very good. can you help me reguarding this project. plz send me your contect num or address i want to meet you plz.
  
ajay_bhargav
29 Apr 2015: 18:47 PM
@Hafiz Muhammad Azeem tariq, please post in forum.
  
media1328
07 May 2015: 15:38 PM
Hi how can I get the Hex file?
  
media1328
07 May 2015: 15:53 PM
Also please tell me which compiler can compile the sours file then can get Hex file itself?
  
ajay_bhargav
08 May 2015: 16:11 PM
@media1328, Its an arduino project. Compile it in arduino compiler. If you have more question post in forum.
  
gun
26 Jun 2015: 16:23 PM
please help me, when i compile always error
"ambiguous overload for 'operator=' (operand types are 'String' and 'int')"
  
ayan pal
16 Jul 2015: 19:42 PM
hello.i m interested on the project..i jst want to make home automation using gsm module sim 300..so can you pls send me the code using avr & I m using atmega16 controller?? and another thing I want that which things are on or off I want a status check kind of message that when I send a msg to that gsm module it will give me the status of the things connected to the relay if it is on or off then if I want I cud turn things on or off accordingly..pls share the code at [email protected]
  
ayan pal
16 Jul 2015: 19:55 PM
i want to make a project on gsm based home automation using atmega16 controller..can you send me the code using avr?? and another thing I want that which things are on or off I want a status check kind of message that when I send a msg to that gsm module it will give me the status of the things connected to the relay if it is on or off then if I want I cud turn things on or off accordingly..pls share the code at [email protected]
  
ajay_bhargav
20 Jul 2015: 04:51 AM
@ayan pal, please post in forum for help. We dont have a project on this topic but we can help you making it.
  
erummumtaz
23 Jul 2015: 22:56 PM
hi! can u please explain me "readstring = 0" in arduino code because when i compile this code an error is occur on this.
  
Fatima Wahid
27 Jul 2015: 19:27 PM
Please can i get the apk file of this smart home project ......
  
ajay_bhargav
27 Aug 2015: 07:12 AM
@ erummumtaz, what is the error?
try changing it to readstring = ""

@ Fatima Wahid, You can get it from app store. I don't know if its available outside.
  
OLD FRIEND
11 Apr 2017: 02:31 AM
Great ,daer what should any buddy do if he need it with esp8266 nor HC05.....WAITING FOR YOUR REPLY.....ALSO GUES WHO AM I......
  
Taufik
12 Jun 2017: 12:27 PM
hey there ! im already make this project but i have a trouble . its possibble to combine bluetooth module and GSM module ? can i get the code for arduino softwaere ? Thanks
  
(Required; Min length 5)
(Required; will not be displayed)

Conversation

ExperimenterUK
Mon Dec 03 2018, 05:17 PM
Please post questions in the forum. The chat box is for chat
Mon Dec 03 2018, 06:43 AM
help!me!
help! I don't understand busy flag!
Sun Dec 02 2018, 08:01 PM
ile
hello
Mon Nov 12 2018, 05:58 AM
Pavan_user
i have seen your replica of I2C programming using AT89C51 but i am unable to understand the "ack_bit" variable usage ...looks like it is always 1...can you elaborate how acknowledgment is working....
bgk3678
Tue Nov 06 2018, 02:36 PM
kindly any one give solution for my problem
ExperimenterUK
Mon Nov 05 2018, 09:48 PM
Pins high is the normal state. You need a program to set them low
mayengbam
Sun Nov 04 2018, 05:41 PM
hello, i am niranjoy, alll the port of my 8051 is always high, even i erase all the program. why is it so happen and what is the problem. any one please help me!
Sun Nov 04 2018, 02:16 PM
BASAVARAJ g kudamble
hi I am interfacing GSM 300 to 8051 microcontroller to receive message from mobile
ExperimenterUK
Sat Sep 29 2018, 06:28 PM
Please post questions in the forum.
Sat Sep 29 2018, 11:26 AM
Ashfaq Ch
hi i have some AT89C51RC microcontrollers already programed. some one help us to how to download from AT89C51RC and after study and edit all corractions reload to AT89C51RC controller

Downloads

Comments

mauste
Thu Dec 13 2018, 01:52 PM
sifirsekiz
Wed Dec 12 2018, 01:37 PM
cadetjeff
Fri Dec 07 2018, 10:11 AM
crak0axel
Sun Dec 02 2018, 01:12 AM
AbuHishaam
Thu Nov 29 2018, 03:43 PM
Evgen87
Thu Nov 29 2018, 10:44 AM
akshaykulkarni
Mon Nov 26 2018, 05:18 AM
atalnet
Fri Nov 16 2018, 07:44 AM

Online

Guests: 44, Members: 0 ...

most ever online: 182184
(Members: , Guests: 182184) on 06 Aug 2010: 05:37 AM

Members: 38028
Newest member: mauste
Forum Activity
sifirsekiz Avatar
Posted By sifirsekiz
Thu Dec 13 2018, 04:31 PM
sifirsekiz Avatar
Posted By sifirsekiz
Wed Dec 12 2018, 01:50 PM
Hi guys I have max30100 pulse sensor need to measu...
ExperimenterUK Avatar
Posted By ExperimenterUK
Mon Nov 19 2018, 01:11 AM
ExperimenterUK Avatar
Posted By ExperimenterUK
Thu Nov 15 2018, 06:48 PM
Unfortunately I have no experience of LabView,but ...
katherineamt Avatar
Posted By katherineamt
Mon Nov 12 2018, 03:22 PM
I have never used LabView and I have to implement ...
ExperimenterUK Avatar
Posted By ExperimenterUK
Mon Nov 12 2018, 01:21 AM
wimac Avatar
Posted By wimac
Sun Nov 11 2018, 04:03 PM
bgk3678 Avatar
Posted By bgk3678
Sun Nov 11 2018, 07:25 AM
ExperimenterUK Avatar
Posted By ExperimenterUK
Tue Nov 06 2018, 06:10 PM
bgk3678 Avatar
Posted By bgk3678
Sun Nov 04 2018, 02:52 PM