Basic Level     Skills: Not specified    
Author
Author email
[email protected]
Author website
www.binu.somee.com

Description

Project not tested

This Project takes over the task of Ringing of the Bell in Colleges. It replaces the Manual Switching of the Bell in the College. It has an Inbuilt Real Time Clock (DS1307) which track over the Real Time. When this time Equals to the Bell Ringing time, then the Relay for the Bell is switched On. The Bell Ringing time can be Edited at any Time, so that it can be used at Normal Class Timings as well as Exam Times. The Real Time Clock is displayed on four 7-segment display. The Microcontroller AT89S8252 is used to control all the Functions, it get the time through the keypad and store it in its Memory. And when the Real time and Bell time get equal then the Bell is switched on for a predetermined time.
  Filesize

34.46 kB

  Downloads

43833

  Rating
 

Comments

Vru
02 May 2019: 15:54 PM
Can I replace LCD display by 7seg
  
ExperimenterUK
06 May 2019: 05:12 AM
The project already uses a 7 segment display.
Note.. this project is marked "untested", it may not work.

I recommend you find a project that is guaranteed to work.
  
(Required; Min length 5)
(Required; will not be displayed)

Conversation

ExperimenterUK
Thu Jul 11 2019, 08:55 PM
@ramos https://www.theengineeringprojects.com/2017/09/l298-motor-driver-library-proteus.html
ExperimenterUK
Thu Jul 11 2019, 08:44 PM
@praveen123. Can you give a link to the project ?
Thu Jul 11 2019, 05:47 PM
ramos
buenos dias alguien podria ayudarme necesito saber como descargar la libreria del l298n para proteus
Thu Jul 11 2019, 12:11 PM
praveen123
anyone can help me
Thu Jul 11 2019, 12:11 PM
praveen123
i need source code for 8051 -smart trolley rfid
Thu Jul 11 2019, 12:10 PM
praveen123
hii
ExperimenterUK
Thu Jun 27 2019, 10:14 PM
Hi.. good to see you again
۞ TPS ۞
Thu Jun 27 2019, 08:31 AM
Hello
AdiGhazi
Tue Jun 18 2019, 12:21 PM
Hlo Dear , I've to program AT89C51AC3 RT-LUM using flip but I'm getting time out error for RS232. Will you please suggest me which programmer will be supportable to program this Chip.
Sun Jun 16 2019, 08:48 PM
hanoch Taub
i need to interface sim800 to 8051, the problem is that on the module sim800 there are 9 pins connector and I don't know how to connect him to 8051, which pins to tx and rx on 8051 module sim there is

Downloads

Comments

3AAPC
Sun Jul 21 2019, 12:41 AM
rpels7707
Fri Jul 19 2019, 11:31 AM
ameya123
Fri Jul 19 2019, 07:36 AM
anhsieuno
Thu Jul 18 2019, 11:39 AM
zxcvbnm1234
Sat Jul 13 2019, 07:09 AM
surajghayal
Wed Jul 10 2019, 01:17 PM
figureyang
Fri Jul 05 2019, 04:25 AM
mousompal
Sat Jun 29 2019, 05:02 PM

Online

Guests: 66, Members: 0 ...

most ever online: 182184
(Members: , Guests: 182184) on 06 Aug 2010: 05:37 AM

Members: 38081
Newest member: 3AAPC
Forum Activity
3AAPC Avatar
Posted By 3AAPC
Sun Jul 21 2019, 12:51 AM
3AAPC Avatar
Posted By 3AAPC
Sun Jul 21 2019, 12:47 AM
With the GPS antenna in the outdoors, I use the ub...
ameya123 Avatar
Posted By ameya123
Fri Jul 19 2019, 07:42 AM
Hello,Please share 8051 Assembly language code for...
figureyang Avatar
Posted By figureyang
Fri Jul 05 2019, 04:37 AM
here is the source code prepared for you download ...
figureyang Avatar
Posted By figureyang
Fri Jul 05 2019, 04:30 AM
Cheap_Flash_FS(Normal Version)--Embedded FAT16/32 ...
wimac Avatar
Posted By wimac
Sat Jun 22 2019, 01:26 PM
I’ve use the AT89C51ED2 which has a similar progra...
ExperimenterUK Avatar
Posted By ExperimenterUK
Thu Jun 20 2019, 10:08 PM
baud rate is 9600 at stop bits of 2. AdiGhaziThe u...
AdiGhazi Avatar
Posted By AdiGhazi
Thu Jun 20 2019, 05:24 AM
Dear,I'm using RS232 serial port cable to use flip...
ExperimenterUK Avatar
Posted By ExperimenterUK
Tue Jun 18 2019, 10:19 PM
Okay.. I have never programmed the AT89C51AC3 or ...
AdiGhazi Avatar
Posted By AdiGhazi
Tue Jun 18 2019, 11:20 AM
Hlo Dear ,I've to program AT89C51AC3 RT-LUM using ...