Basic Level     Skills: Not specified    
Author
Author email
[email protected]

Description

Combination Lock with LCD and Keypad using pic16f628A:

A Brief Description:

This project is written in C language. The basic user lock is of 2 Digits.
The input is taken from a 4x3 Keypad (please see the schematic for more information) and Display the user input on a 2x16 LCD. A pin is assigned as output for activating and deactivating the lock. For demonstration I have connected an LED to that pin.


How combination lock works:

1. Turn switch on (5V DC voltage power supply)
2. A message name “Combination Lock” will display on LCD at first row,
3. Second row display “Enter Pass:” it asked you to enter password for open doors.
4. In this lock design it has three doors. These are the code locks to open doors “door1=05, door2=28, door3=82, door1 & door2 = 33”.
5. If you entered one of the codes in step 4 then press enter key that door will open. For example, you enter 05 for door 1 it’s then open and close door 1 after 5 seconds.
6. If codes you entered are not matched one of the code in step 4 then led door is not turn on.
7. If your first attempt failed the message “invalid code’ display on screen.
8. Then you pressed any key to clear and you can try for second attempt.

After you have reached three attempts but you have not entered correct password. Next Any Keys press alarm will activate for 5 seconds.

Using the Keypad:
Keypad has 12 keys (4x3) starting from 1,2,3,4,5,6,7,8,9,*,0,# (please see the schematic for layout). Numeric keys are used for entering numbers. '*' is used as the Cancel key and '#' is used as the Enter key.

Download File Information:

Flowchart.jpg
Combination_lock.c
Diagram bitmap.bmp
Lock_EBES_MODEL.DSN ( Using Proteus to run this file)
Combination_Lock.hex
Tags PIC digital lockpic microcontroller combination lockcombination lock projectPIC microcontroller digital lockdigital lock using pic micro
  Filesize

70.27 kB

  Downloads

64629

  Rating
 

Comments

hasitha
21 Jul 2014: 19:30 PM
what compiler use to write this project codes? How can i edit this code?
  
(Required; Min length 5)
(Required; will not be displayed)

Conversation

shshistiem
Wed Sep 12 2018, 10:58 PM
hii!! some1 please let me know how i ll get rfid code to 8051 by WEIGAND mode
DrNossberg
Tue Sep 11 2018, 08:09 PM
is there anyone here?
Mon Aug 27 2018, 07:30 AM
bun
Hello everyone!
Sat Jul 21 2018, 06:21 AM
Dibakar Bhanja Chowdhury
By using a 555 timer how can I expand the range of the mobile phone jammer? Please reply me asap
Sun May 20 2018, 10:01 AM
justinb
how to write and execute a program that read the keypad button and display the number on 7 segment on intel8051 at89s52 in assembly language?
Thu May 17 2018, 06:36 AM
HAMZA TAJ
sir iwant to ask about controller of three phase supply by using back to back thyristor instead of triac....will u give me some guideline?
Sat Apr 28 2018, 12:54 PM
ashutosh jain
IR Remote Switch using TV remote (RC5 Protocol) is not working properly. opp1 & opp2 is in problem.plz help
ExperimenterUK
Fri Apr 27 2018, 08:09 PM
@kaiserslautern Post in forum
Wed Apr 25 2018, 07:09 AM
kaiserslautern
Hello everyone, using software uart is a very good idea for a second serial port. Thank you so much. I would kindly like to know how to connect this port to the PC?
ExperimenterUK
Sat Apr 21 2018, 07:50 PM
This is a community site. Feel free to help anyone needing advice

Downloads

Comments

PCBindex
Fri Sep 14 2018, 02:45 AM
sirkit
Thu Sep 13 2018, 04:46 AM
shshistiem
Wed Sep 12 2018, 10:36 PM
DrNossberg
Tue Sep 11 2018, 03:25 PM
ranjanvh
Thu Sep 06 2018, 02:28 PM
rbbhamre
Tue Sep 04 2018, 06:15 PM
Tressie
Sun Sep 02 2018, 02:20 PM
Sudhansudeep
Fri Aug 31 2018, 08:26 AM

Online

Guests: 53, Members: 0 ...

most ever online: 182184
(Members: , Guests: 182184) on 06 Aug 2010: 05:37 AM

Members: 38006
Newest member: PCBindex
Forum Activity
ExperimenterUK Avatar
Posted By ExperimenterUK
Thu Sep 13 2018, 08:39 PM
First of all, by reading your reply, I abandoned m...
DrNossberg Avatar
Posted By DrNossberg
Thu Sep 13 2018, 03:49 PM
Hi, thanks you for your reply ^^ First of all, by ...
ExperimenterUK Avatar
Posted By ExperimenterUK
Wed Sep 12 2018, 12:12 AM
HiThere are several issues here.The original 8051 ...
DrNossberg Avatar
Posted By DrNossberg
Tue Sep 11 2018, 08:08 PM
Hello everybody!First of all let me explain some s...
ExperimenterUK Avatar
Posted By ExperimenterUK
Fri Sep 07 2018, 05:08 AM
The compiler thinks the micro doesn't have enough...
Sudhansudeep Avatar
Posted By Sudhansudeep
Fri Sep 07 2018, 02:59 AM
this is the build output message
Sudhansudeep Avatar
Posted By Sudhansudeep
Fri Sep 07 2018, 01:38 AM
Change the mobile number as [number removed] in t...
ExperimenterUK Avatar
Posted By ExperimenterUK
Thu Sep 06 2018, 08:56 PM
I don't know what the problem is, I get no errors....
Sudhansudeep Avatar
Posted By Sudhansudeep
Thu Sep 06 2018, 01:12 PM
the code is Attachment ...
Sudhansudeep Avatar
Posted By Sudhansudeep
Thu Sep 06 2018, 12:48 PM
the code is same as u sent me for 16 chars