Miscellaneous [ All other miscellaneous libraries which do not fit in above catagory ]
|
RC5 decoding using TSOP1736 and 8051
|
Comments
talhairfan
| 23 Apr : 15:38
All the code is understandable but please tell me why are you taking the 1.758msec delay for address & command respectively and also i have to ask that you said that CMD variable would have the command.
If I have to send this command to PC through serial port. would I simply mov A, cmd and send it through serial port..?
Reply to this
anita rajguru | 13 May : 21:52
here i m having prob about displaying the codes on the display which is running on interrupt at 00bh location n getting refresh after 2 ms.now i want to run remote through interrupt at 013h n after sensing first low pulse it should come out of interupt n display the codes.if i m keeping the pulse measurement in the interrupt then i get correct codes but the display get stuck in code it do not refresh display. if pulse measuring is out of interrupt then stucking problem is solved but code are wrong.
Reply to this
Submit comment
Google Search for Microcontrollers!
