Great Work Amit

keep doing great Projects and have us informed!
Reply to this  

Amit Radha | 05 Aug : 10:59 Thanks Shyam, and thanks to all who helped me with this. Ajay, Pdi33, Sashijoseph, thanks alot guys... Btw i scored 92 in internal assesment and 97 in my external out of 100 Reply to this

aryanLOVEU | 12 Sep : 21:24 hello amit sir.....congrats for ur ninties in ur project... i m quite impressed with the project. So i too hav decided to work on it..but there are not too much discussion in forum on it. i have some doubt like.... i m not much good on 89s52...can i use another microcontroller by keeping the same programming as u gave us? do i need another programmer. i have for 89c51? flash magic and topview simulator dont have this microcontroller in the list while keil evaluation software only provides upto 2k.. plz help regarding me so that i can start work....main problem is 89s52.....dont know much abt dat... thanks once again 4 this gr8 project Reply to this

Anonymous | 13 Feb : 11:27 can u plz mail me code in embeded c........thx u ..........technocrat666@gmail.com....... Reply to this

zMukeshz | 06 Aug : 09:27 hello i'm not able to download this report plz email me this zmukeshz@yahoo.co.in Reply to this

jaja | 06 Oct : 08:18 em..congrat can u help me?:smile Reply to this

jaja | 06 Oct : 08:14 plz send me the correct code on my email r_rakous@yahoo.com:smile Reply to this

hi... can we upgrade ur project in anyway??am really interested in dis one so
Reply to this  

hello amit sir.....congrats for ur project...

i m quite impressed with the project. So i too hav decided to work on it..but there are not too much discussion in forum on it.
i have some doubt like....

i m not much good on 89s52...can i use another microcontroller by keeping the same programming as u gave us?
do i need another programmer. i have for 89c51?
flash magic and topview simulator dont have this microcontroller in the list while keil evaluation software only provides upto 2k..

plz help regarding me so that i can start work....main problem is 89s52.....dont know much abt dat...

thanks once again 4 this gr8 project
Reply to this  

Thank you all very much.

@aryan, harman, Please post doubts in the forum. You can use 89c51 also. Just check what is its ROM size as the code is more than 2K. 89S52 that i have used is same as 89c51, just a few variations which I have not bothered to use. Please check a thread "Sensors" which has the entire discussion of the project.

@amrita if you read the report, you can find I have suggested a number of improvements, but you may have to change the uC for that.

Please note that I have been informed there is an error in the code. I am trying to find the final real working code but am unable to do so. Kindly start this if you can complete the code.
Reply to this  

can you help me to interface this project with computer?how difficult interfacing this ckt to the PC will be?
Reply to this  

iooiuououi
Reply to this  

a very inspiring project submitted by you amit. i am in the process of trying it.
Reply to this  

@biro
Please post a thread on this, I dont have any idea on PC interfacing. If you create a thread many people will be able to assist.

@nandi
Thank you I hope you can experiment and improve upon its features.
Reply to this  

can u plz give me the ckt diagram...........as i am working on this project......plzzz be soon as i am already too late...!!

thanx
Reply to this  

Mithun have you downloaded the report? All the circuits are there in it..
Reply to this  

hi amit thanx for posting the project in website.
i wil go through this,if i have any doubt means, i wil contact u, for easy plz mail me ur e-mail id to my mail-id: prasanna_241186@yahoo.co.in.

PLZ DO ME THIS FAVOUR,

THANK YOU
Reply to this  

amit plz send me the package design of ur project&component lists plz......

:-)
Reply to this  

can u tell me how much did this project cost u in making it
Reply to this  

Have u found out the error in the code ?
Reply to this  

can u plz mail me code in embeded c..........technocrat666@gmail.com
Reply to this  

can u please mail me the source code in embedded c

Reply to this  

Sirajul.hassen@yahoo.com | 23 May : 10:31 Hey, i m siraj, i m facing problem with the source code as the limit is more than 2k, what should i do? Plz reply me at sirajul.hassen@yahoo.com. Reply to this

its a superb project........ can u please mail me the source code in embedded c to vinay8488@gmail.com
Reply to this  

can u tell me the connection of ac switch and dc switch and what about smd leds

Reply to this  

please sir i want help as i have few day to complete the project for my final year
reply as soon as possible

Reply to this  

nice project frnds.......

but PCB layout is missing........

I miss that....
Reply to this  

i m not able to get the output on the lcd . i m getting only boxes and no data .please help me in this part of the project.

Reply to this  

hiiiiiiii amit radha
Nice project
i am working on the project and i need the hex code .
as i am not the member of this site i can not access the forum to the fullest ,plz dont ask me to signup i am tired an d dont know whats the problem with the site on our college connection signup hota hi nahi
plz sen me the correct code on my id
avin.india@gmail.com
PLZ or contact me 09969006120
Reply to this  

thanks
Reply to this  

Sir
Kindly tell where it is implemented in the world


Bye

Malavikamurthy
Reply to this  

hello sir i am working on this pjt.pls can u send me the source code to my id. vinumys86@gmail.com
Reply to this  

hi i m working on this project.
but actually i can't initialized the LCD using by the given coding. so tell me where i m doing wrong.
my id "pratikengi@gmail.co.in"
pratik gohel.
Reply to this  

, i have just finished work on my hard ware i just want hex file plz mail me too i shall be very greatfull to u
my id is mukulpatel_08@yahoo.co.in
Reply to this  

hello sir,
im working on this project and found some difficulties.
i m enable tto get 4083 and HIH4000-001.pls tell me their equivalents. i also want hex file plz mail me too i shall be very greatfull to u.my id is [b]gaurav_batra2611@yahoo.com
Reply to this  

my id is gaurav_batra2611@yahoo.com
Reply to this  

Hey Gaurav batra
Its a little mistake in the Components page
its not 4983 ...its 4093 Nand Gate IC
and talking about the Humidity sensor HIH4000-001 its a costly sensor and if not available in local market then you may have to go for purchasing it online via shipment...but still all the senior members of this site who have completed this project will guide you to use this sensor because of its good response...i have no idea of its equivalent!
Reply to this  

hello iam a engg student i need proload programmer and the documentation for the programmer please help me to complete this project my email address is eshafeeqe@gmail.com
Reply to this  

instead of Humidity sensor HIH4000-001 you can also use HSM-20G...
Reply to this  

UR PROJECT REALLY DREW MY INTEREST. COULD U SEND
ME ALL DETAILS OF D PROJECT AT MY EMAIL-
jitenderpal@in.com
Reply to this  

very excellent information provied by ajay bhargav

thak you.
Reply to this  

could u give me d complete information of ur project to my mail plzzzzzzzz my mail is eshafeeqe@gmail.com
Reply to this  

awesome project pls email me the full details.... plss...

cybershocker@gmail.com
Reply to this  

NICE & EXCELLENT PROJECT.

1)SIR, IS THERE ANY MISTAKE IN CODE THAT YOU HAVE GIVEN?

BECAUSE IT WONT GET COMPILE

2) CAN WE HAVE THE COMPILER FOR 89C52?
Reply to this  

hello sir,

cam you tell me which 1 is true between circuit diagram and code that you have given?

i am getting confused here
Reply to this  

Ajay Bhargav | 24 Jul : 08:59 all are true.. use forum for any help. Reply to this

Hello Amit sir,
We have decided to do Green Bee as our final year project.
Expecting whole hearted support from you...
Will contact U when in doubt.... Thank you
Reply to this  

hello sir thanks for your project can u tell me total cost of this project .please sir reply soon
Reply to this  

only humidity sensor is expensive ...rest everything is cheap and wont cost u much
Reply to this  

plz email me this greenbee project report on my mail zmukeshz@yahoo.co.in i'm not able to download this plz help
Reply to this  

Ajay Bhargav | 07 Aug : 08:57 what is the problem? Reply to this

can u tell me where can i get all the equipment (used in this proj )
in orissa?what is the approx cost?
Reply to this  

i m getting 2 much fluctuations on lcd the all the readings are changing after few seconds itself pls help
Reply to this  

SIR , I HAVE DECIDED TO WORK ON UR PROJECT......BUT I AM NOT ABLE TO COMPILE IT'S CODE GIVEN BY U IN KEIL.....SO PLEASE HELP............

COMPILER SAYS:--
FATAL ERROR OVER LINE 250....
Reply to this  

haxor | 28 Aug : 18:15 The asm file is with no errors Reply to this

a really impressive project.......can you please tell how much does the whole project cost??
Reply to this  

Great project! but how about implement Fuzzy Control, PWM on ans A/C control CO2, TDS, PH, adjustable temp, RH
Reply to this  

Hello amit....rly inspired with this...gonna work on it...Lil favour frm u...need the code in hex as well as in embedded C...Plz mail it to raoshru@yahoo.com...Lookin fwd to it...thank u...
Reply to this  

hello sir i just want to know how to compile the codes and to generate hex codes
Reply to this  

hello there.. we are planning to work on your project and innovate it somehow.. but im quite confused about how you implemented the project and got the results.

did you really apply it on real system or simply simulation?
how did you test if its really working? did you use real water pump, sprayer, cooler, artificial lights?

thank you. hoping for ur response.
Reply to this  

Ajay Bhargav | 06 Oct : 07:20 You can ask this in forum, so author can reply. Reply to this

plz send me the correct code on my email
r_rakous@yahoo.com
ile
Reply to this  

Ajay Bhargav | 08 Oct : 03:54 code is fine.. Reply to this

kunal sachdeva | 05 Nov : 01:05 is ur harware properly running?? help me out as i am not been able to get any output on lcd. Reply to this

i like the project very much can u please give me the details ....
jaiswal.priyanshu@gmail.com
Reply to this  

i am not been able to get any output on lcd , except being a light on it, means lcd is not intialized. i had also checked my lcd and it is working on another project .so tell me about the loop holes present in the circuit diagram.
if any other loop hole is there , inform about that also as short time left.
Reply to this  

hello sir i m doing project of greenbee. we have completed the hardware but we did not get output data on lcd. is there any thread in ckt diagram or asm code? if yes then plz send me solution of it.
thanxxxx

Reply to this  

Ajay Bhargav | 14 Nov : 07:09 use forum.. forum has related topic in "Project Doubts Forum" Reply to this

hello sir,
great pleasure for ur project but pcb layout is missing.....
plz send the layout to my id (msmani9891@gmail.com)
ur codes r asm & perfect coding thank u sir..
once again thank u sir
Reply to this  

Ajay Bhargav | 16 Dec : 13:56 check pictures carefully project is soldered on a simple general purpose PCB. solder yourself. if you want a PCB then make it and share it with us Reply to this

hello!

we are building this projects as our final one...
but we are finding a hard time looking for the components specified
can we used a 12MHz crystal instead of 11.0592 MHz?
what about HIH4000? are there any replacements?
and the microcontroller, can we make used of a AT89S2051/4051? or any other?

please help. much greater will be appreciated for it. thanks.

alloc_21_lyndon@yahoo.com.ph
Reply to this  

Ajay Bhargav | 23 Dec : 06:35 Make use of forum to get answer from project author. Reply to this

we find some problems in codes. The o/p is not appearing.so we urgently require correct codes.plz send it on my email
Reply to this  

Ajay Bhargav | 24 Dec : 16:02 codes are fine and working, just you need to create hex file on your own. use keil to assemble. Reply to this

HELLO RIR I M VERY MUCH HAPPY TO SEE THIS PROJECT I WANT TO THANKS Amit Radhakrishnan, Poonam Bansal, Prabhat Kumar, Smitha P., Chinmayananda Das, I also thanks to AJAY SIR for this incomprerible Ricky world for me and other fresher in 8051 & embedded . ......
HELLO SIR I WANT TO WORK on this project . sir i m contact with embedded & 8051 since two m0nth plz tell basic requirnment for this project.
sir i want to this project with 8051 &embedded-C.
PLZ HELP ME............. GIVE YOUR OPINION PLZ HELP ME............................

REGARD...
SHAILESH AGRAHARI
<AGRAHARI_SHAILESH@YAHOO.CO.IN>
<YASHELECTRON@GMAIL.COM>
Reply to this  

Ajay Bhargav | 26 Dec : 10:28 use forum for any kind of help. understand the working of project, will be easy for you if you can draw some kind of flowchart. the complete documentation of project is available in the project report. so wont be difficult for you. In case you need help you can always use forum for it. Reply to this

hello chinmay/ajay sir i want to know about humidity & moistre sensor , which you used sir ,sir can you give me a small overview of working of this project so that make it easy for diagram , perhabs sir i m some cofusion .plz.............
sir if any guidence in study to varrious component &how i can get more kwldge abuot this project ,then plz sir.....

thankyou sir <Shailesh Agrahari>

Reply to this  

M.Mohsin | 27 Dec : 04:50 goto project doubts section and there's a thread for this project..u wil find solution to ur every problem there Reply to this

hello sir accordng to advice i m i m stdy on each block. sir i m unable to get register definition (buzz, ....). sir i m testing this project on protios to test before working .sir i have completed d circuit but there no masg on lcd, i have use yr assm code directaly.sir what is sensor leads. plz help .....as soon as possible..
sir i attach circuit on project doubt
<shailesh agr>
Reply to this  

soory for above mistek plz...........
plz repply..........
Reply to this  

can you tell me why using interupt LCD SWITCH , P3.2 (INT0) is connected to SWITCH for LCD. What for?,not use ?
Reply to this  

Ajay Bhargav | 30 Dec : 07:13 use forum for doubts Reply to this

toinhatminh | 30 Dec : 08:20 i create forum with name "ask and answer green house " Reply to this

We have decided to include an additional part which includes a GSM module that can be used for sending the information to the farmer's mobile. So does anyone know how to interface a GSM module with atmel microcontroller...?? Reply..
rahul.asok@live.com
Reply to this  

This project is really nice mr amit & your friend
but only problem is that to getting the soil mostuire sensor(hih 4000)
can we use any other sensor in that place

thank you
Reply to this  

hello sir ,nice project..............
plz mail me the ppt version of green bee project...........
on my email id hemant_rathore94@yahoo.com . thanks sir
Reply to this  

Hi.. im Mehak...im in Last year of Computer Engineering...and im doing my project abt green bee...plz help me some more abt that project...
my id is deman.of.dust@gmail.com
Reply to this  

send me ppt of this project plz
Reply to this  

VERY THANKS 2 Amit Radhakrishnan, Poonam Bansal, Prabhat Kumar, Smitha P., Chinmayananda Das, Ricky AOUTHERS

MY GROUP COMPLETED AND RUN THIS PROJECT SUCESSFULLY
AS MAJOR PROJECT THANKS ALOT
Reply to this  

Ajay Bhargav | 13 Apr : 06:41 congrats do post images in forum if you have. Reply to this

plz email me this greenbee project report on my mail ujjwal.sachdeva06@gmail.comin i'm not able to download this plz help
N can u tell me where can i get all the equipment (used in this proj )
in DELHI? what is the approx cost?


Reply to this  

thanks a lot.....thanks
Reply to this  

can i get the code in embedded c
Reply to this  

Ajay Bhargav | 07 Jun : 08:55 C version is also there check download section. Reply to this

sir can u please send me PCB layouts of this project
please
my id is
deman.of.dust@gmail.com
Reply to this  

is it posible to do the same project with the help of VLSI(fpga sparton3 kit) i.e using VHDL coding?????

plz rpl me on this id....akshay1420@yahoomail.co.in
Reply to this  

sir..can i have this project? pless email me at nabilahella_90@yahoo.com
Reply to this  

Ajay Bhargav | 07 Sep : 10:47 use the download button to download it. Reply to this