HA Doubt

thanks sir

i have click sever start but nothing happen..am i suppose to do something more then just setting the com port and clicking sever start?

from the demo on your web site we need to use command prompt but that is using with delphi server. wht about HAserverVB,do we need to use the command prompt??

anyway i tried entering telnet on the command prompt window but it says " 'telnet' is not recognized as an internal or external command,operable program or batch file".

what do u mean by "returns 6"??

Hi sir,
I m working on this project.
- Hardware is done...
- But project is not working...
- When i telnet to the HAServer - All commands written on the Client Pc will
appear on HAServer. But status of LEDs do not Change.
- I checked hex file which is of "12kb", but 89c51 supports only "4kb" ROM . Is it necessary to use another IC?
- I burned the hex file into Philips IC "P89V51RD2"
-I dont understand where is the problem?

@ aba did u chek ur hardware on hyperterminal???? is it working there??? i think there is a problem in your serial interface chek ur Max232 connections and DB9 adapter....wat is your LCD showing after power on???

@aba i suggest u to creat a new thread! That will b better for you (to get solution) and for us to understand your problem

anyway i tried entering telnet on the command prompt window but it says " 'telnet' is not recognized as an internal or external command,operable program or batch file".

Tiub

Well i guess you are using vista or window 7.
Telnet is not pre-installed on Vista and Win7 OS. so to install it just go to control panel -> programs and features -> Add/Remove windows component

then look for telnet in list and install it.

yes thats normal just run the setup from software menu.

sir which software menu u r referring to??

@ Tiub follow these steps!

Vista comes with a telnet client and server. They are not enabled by default. If you would like to use either of these features, just follow these steps…


1. Click the Start Orb
2. Click Control Panel
3. Select Programs
4. Select Turn Windows Features on or off
5. May need to confirm the UAC
6. Wait…
7. Click the checkboxes beside the telnet client or server.



8. Press OK

.... i have done that sir, i click both. telnet client and telnet server....

i have set the settings on HAserverVB and i have click server->start at HAserverVB but HAserverVB windows still says "please run setup". . . . this confuse me,i have start the server but it still say "please run setup"... "please run setup" which setup is it referring to?

sorry to say i didn't understand your problem wat u wanna say!!
when u double click the server icon wat is displayed???

software is referring to server setup.

go to file->setup or press ctrl+s to run setup.