Need 8051 Development Board Circuit
Discussion in "General help Guidance and Discussion" started by Rasengan Mar 18, 2010.
Thu Mar 18 2010, 09:21 pm
Hi friends.I need a 8051 Development Board Circuit diagram especially 89020 one.I have this Board because of a workshop.
I need this circuit to advance its use.This board is
Compatible with most of the 8051 and 8052 series of microcontroller
Available with AT89s51, AT89s52 or P89v51RD2 microcontroller
On board motor driver for driving 4 DC motors or 2 stepper motors
LCD interface
PC interface through UART
8 channel ADC converter
11.0592 MHz crystal
Exposed 8 channel 3 I/O port for general-purpose application
Five tact switches for external input, reset and interrupt
Four test LEDs for status and debugging purpose
Buzzer
Exposed ISP pins for Programming
Programming can be done through serial port for P89v51rd2 micro controller
On board regulated power supply
Please reply
I need this circuit to advance its use.This board is
Compatible with most of the 8051 and 8052 series of microcontroller
Available with AT89s51, AT89s52 or P89v51RD2 microcontroller
On board motor driver for driving 4 DC motors or 2 stepper motors
LCD interface
PC interface through UART
8 channel ADC converter
11.0592 MHz crystal
Exposed 8 channel 3 I/O port for general-purpose application
Five tact switches for external input, reset and interrupt
Four test LEDs for status and debugging purpose
Buzzer
Exposed ISP pins for Programming
Programming can be done through serial port for P89v51rd2 micro controller
On board regulated power supply
Please reply
Fri Mar 19 2010, 02:00 am
I think you can make this on your own if you know all this. And most probably the vendor should have provided circuit with the dev board otherwise its of no use.
Fri Mar 19 2010, 08:42 pm
See this image
http://www.technophilia.co.in/product_details.aspx?product_id=77
Check the above the link
Can u tell me whether this is a general board whose circuit may be available on net?
http://www.technophilia.co.in/product_details.aspx?product_id=77
Check the above the link
Can u tell me whether this is a general board whose circuit may be available on net?
Sat Mar 20 2010, 04:45 pm
Hello Rasendan!
V nice idea....to make Development board it is no difficult schematic is attached
Hope this will help u dont leak it
V nice idea....to make Development board it is no difficult schematic is attached
Hope this will help u dont leak it
Sat Mar 20 2010, 09:02 pm
Thanks for the schematic,coolmirza143.
I wanted to know how the microcontroller is connected to Motor driver IC.Do u have circuit for that too?I need it for line follower Robot.
I wanted to know how the microcontroller is connected to Motor driver IC.Do u have circuit for that too?I need it for line follower Robot.
Mon Mar 22 2010, 03:38 pm
L293D (h-bridge motor driver) is very easy to use. follow the link
http://www.8051projects.net/microcontroller-tutorials/
check DC motor tutorial for more information.
http://www.8051projects.net/microcontroller-tutorials/
check DC motor tutorial for more information.
Powered by e107 Forum System