Metro Train Prototype Project with Project Report





It has been a long long time since I posted a new project on our website. Today I looked in to all my old emails and checked all pending projects which were not uploaded. I want to thank Gaurav Sharma for submitting this wonderful project. I Hope to see more contribution from him.

Metro Train is one of the biggest transporation medium in Delhi connecting all ends of Delhi together. This project is a very simple train prototype of current Metro Train. This prototype is powered with 8-bit 8051 microcontroller. As you know Metro trains run in one direction at a time, so prototype uses only one motor to move the forward. There is an additional motor which is used to open and close the doors of train. LCD is used to display welcome message, current station and next station messages. A buzzer is there to indicate opening and closing of doors.

Working Of Metro Train:

When the power is turned on a message ("welcome to Bhopal metro") is displayed on LCD. Then a message "Current station is Indrapuri" is displayed and door is opened. A buzzer is also turned on when door opens. After some delay the door is closed and car is started to move forward. A message "current station is Indrapuri" is displayed also on LCD. After some time a message indicating the next station is displayed "next station is M P Nagar". After some time the train stops and a message "current station is M P Nagar" is displayed. This process is continued for five stations. In the end a message "End of line" is displayed on LCD. This whole process is repeated until we turned off the power supply.

A big thanks to Gaurav Sharma for submitting this project.

Go to download section to download project files: Metro Train Prototype Project with Project Report
printer friendly create pdf of this news item

Submit comment

(Required; Min length 5)
(Required; will not be displayed)

Conversation

Wed Nov 08 2017, 01:35 PM
Anirudh jain
I want to burn code in atmel 89s51 24pc 0329 but cannot get the connection with the burner. Can somebody provide me with the circuit diagram for connecting controller to burner. I'm using usb burner
Thu Nov 02 2017, 11:44 AM
karpal
write a program to exchange the content of b register with external RAM address 02CFH help me
Wed Nov 01 2017, 05:47 PM
sanae
i am using the DHT11 but i'm getting some errors in the simulate the programe in proteus 8 professional,: 1)cannot find model file 'DHTXX.MDF'.2)simulation failed due to netlist linker error(s).
Fri Sep 29 2017, 02:45 AM
Maaz
i am doing the same project on verilog please contact me Maazhabib@iiee.edu.pk
Wed Sep 20 2017, 12:36 AM
Ted
In a missing pulse detector using a 555 timer connected as a monostable vibrator with a PNP transistor,how does the positve input pulse turn on the PNP transistor?
Sun Sep 03 2017, 02:29 PM
martymarty
How do I connect an <NOKIA 1100 LCD > to an atmega328P ?
poojab51296
Sun Aug 20 2017, 10:23 AM
i am intending to interface sd card with STM32F4 and want to write a file in sd card using SPI protocol but using HAL only. Can anyone help me PLEASE!!!!
poojab51296
Sun Aug 20 2017, 10:22 AM
hello
rawat742
Fri Aug 18 2017, 11:37 AM
hi @ angel patel i will attach a file i hope it will be helpfull for you
ExperimenterUK
Mon Aug 14 2017, 09:57 PM
@ angel patel... just log in and post your problem

Downloads

Comments

bluemoon
Thu Nov 23 2017, 08:23 AM
PANDIKOTESWARARAO
Mon Nov 20 2017, 07:40 PM
Hemantika
Sun Nov 19 2017, 07:34 PM
cws_ap@yahoo.com
Wed Nov 15 2017, 10:46 AM
Ansh12
Sat Nov 11 2017, 03:43 AM
AngelGT93
Fri Nov 10 2017, 06:53 AM
JardCrocker
Wed Nov 08 2017, 05:27 PM
vivitern
Tue Nov 07 2017, 09:08 AM

Online

Guests: 71, Members: 0 ...

most ever online: 182184
(Members: , Guests: 182184) on 06 Aug 2010: 05:37 AM

Members: 37919
Newest member: bluemoon
Forum Activity
ExperimenterUK Avatar
Posted By ExperimenterUK
Mon Nov 20 2017, 10:18 PM
Here is a version of the tutorial that reads a key...
Ansh12 Avatar
Posted By Ansh12
Mon Nov 20 2017, 02:15 AM
As a starting point, can you tell us how much of t...
ExperimenterUK Avatar
Posted By ExperimenterUK
Sun Nov 19 2017, 08:35 PM
As a starting point, can you tell us how much of t...
Ansh12 Avatar
Posted By Ansh12
Fri Nov 17 2017, 04:07 AM
I am looking keypad interfacing program. I was rea...
JardCrocker Avatar
Posted By JardCrocker
Wed Nov 08 2017, 05:29 PM
Hi...i am a new user here. I was also facing the s...
ExperimenterUK Avatar
Posted By ExperimenterUK
Tue Nov 07 2017, 07:13 PM
> It employs a fairly advanced technique to detect...
vivitern Avatar
Posted By vivitern
Tue Nov 07 2017, 09:33 AM
I own a used Clavia ddrum4 SE drum module. It empl...
bvdb Avatar
Posted By bvdb
Wed Oct 18 2017, 01:50 AM
I purchased the RKitL51 8051 C compiler from Raiso...
ExperimenterUK Avatar
Posted By ExperimenterUK
Mon Oct 16 2017, 11:44 PM
That looks complicated.Is 8051_BLK a standard 80...
ExperimenterUK Avatar
Posted By ExperimenterUK
Sun Oct 15 2017, 07:29 PM
According to this, gmail should support POP3.https...