Discussion in "Hardware" started by    pravin_35    Nov 20, 2010.
Sat Nov 20 2010, 12:19 PM
#1
hi,
guys

anybody knows to trouble shoot pc monitor 14" crt

my pc monitor color fade i don know wat is going on inside..... i have changed the monitor and tested its working good........ but my crt monitor is not working with real colour....
plz any one help me.....to trouble shoot
 abin444 like this.
Sat Nov 20 2010, 12:25 PM
#2
Pravin its better if upload some pic of color fade .......

most times it is because of cable damage.......
Sat Nov 20 2010, 05:44 PM
#3
ya mirza

if u see the pic in ur system it will look good........ but in my sys it looks diff ......
Sun Nov 21 2010, 05:46 AM
#4
can u upload a picture what its look like?
mirza is right, sometimes its cable damage. Another thing is lost connection of soldered parts inside the monitor.
Sun Nov 21 2010, 09:39 AM
#5
my start button in computer desktop looks green.........
Sun Nov 21 2010, 11:40 AM
#6
try to eliminate the problem by, first, check the cable. 2nd shock your monitor a little if the color will change then cold solder is the problem.
 pravin_35abin444 like this.
Sun Nov 21 2010, 08:41 PM
#7
Also check for a bent pin in the connector.
 pravin_35 like this.
Mon Nov 22 2010, 05:29 AM
#8
@Pravin Take a look here

http://www.repairfaq.org/sam/monfaq.htm
 pravin_35 like this.
Mon Nov 22 2010, 08:17 AM
#9
hi guys,

thnks a lot ill try & tell the feedback.....
Mon Nov 22 2010, 10:28 AM
#10
dont worry pravin we will help u. I know something about TV we have Electronic repair shop here
 pravin_35 like this.

Get Social

Information

Powered by e107 Forum System

Conversation

Sat May 30 2015, 06:11 AM
lakshmikanth
can you plz guide me how can i open web home page through gprs
Sat May 30 2015, 06:09 AM
lakshmikanth
Hi,
ExperimenterUK
Mon May 25 2015, 06:21 PM
@Subrat Sahu not a simple answer.Create a thread in "General help Guidance and Discussion" forum
Sun May 24 2015, 06:51 AM
Subrat Sahu
I have a confusion about 10 bit adc formula as describe bellow that resolution = Vref/1023 or Vref / 1024
ExperimenterUK
Sat May 23 2015, 08:54 PM
@utpal.. Create a thread in the Pic forum
Thu May 21 2015, 01:04 AM
utpal
i am a hobbist. i work on 8051. just i have started with pic 16f877. but a bitter experiance is going on. as i am programming any code to my pic877 and putting it in my board and it is working, but the 2nd time it is not taking any program,I have experimented just 7 new one pic mcus. result is the same. please tell me the reason. my programmer is TOP3000(universal programmer).
ajay_bhargav
Wed May 20 2015, 04:48 AM
@lak you can use the same code provided you are not using any s52 specific ports and registers.
Mon May 18 2015, 05:58 AM
lak
i used to develop a code for at89s52 shall i use the same code for at89c4051
Sun May 17 2015, 07:57 AM
Ayoosh
what if i have to rotate motor continuously at a step angle of 1.8 degree
ExperimenterUK
Fri May 15 2015, 06:02 PM
@oracle1946.. Post your question in the PIC forum

Downloads

Comments

vipinpathakg
Wed May 27 2015, 05:57 AM
MuhammadTanvir
Sun May 24 2015, 11:02 AM
as_rog
Sun May 17 2015, 08:00 AM
oracle1946
Thu May 14 2015, 03:34 PM
kakaru32
Tue May 12 2015, 04:29 PM
Yateesh
Sat May 09 2015, 02:46 AM
scmg
Fri May 08 2015, 06:40 PM
OMERO
Fri May 08 2015, 11:53 AM

Online

Guests: 53, Members: 0 ...

most ever online: 182184
(Members: , Guests: 182184) on 06 Aug 2010: 05:37 AM

Members: 37662
Newest member: vipinpathakg
Forum Activity
diana1234 Avatar
Posted By diana1234
Sat May 30 2015, 11:40 AM
Thank you ExperimentarUKAlso please tell me how i ...
ExperimenterUK Avatar
Posted By ExperimenterUK
Fri May 29 2015, 09:05 PM
UDN2981 IC is not available in local market. pleas...
ExperimenterUK Avatar
Posted By ExperimenterUK
Fri May 29 2015, 08:56 PM
P0[0]/RD1/TXD3/SDA1 , P0[1]/TD1/RXD3/SCL1 and P0[2...
diana1234 Avatar
Posted By diana1234
Thu May 28 2015, 11:15 AM
Hello there,I am using a MCU LPC2468/78 and in its...
ajay_bhargav Avatar
Posted By ajay_bhargav
Thu May 28 2015, 05:06 AM
UDN2981 is an 8-channel driver which can source cu...
ajay_bhargav Avatar
Posted By ajay_bhargav
Thu May 28 2015, 04:53 AM
[Topic moved to Electronics forum]
vipinpathakg Avatar
Posted By vipinpathakg
Wed May 27 2015, 04:25 PM
UDN2981 IC is not available in local market. pleas...
ajay_bhargav Avatar
Posted By ajay_bhargav
Wed May 27 2015, 02:17 PM
UDN2981 is required to drive the LED matrix, are y...
vipinpathakg Avatar
Posted By vipinpathakg
Wed May 27 2015, 06:28 AM
I have created all the hardware of 5x7 LED Dotmatr...
ExperimenterUK Avatar
Posted By ExperimenterUK
Mon May 25 2015, 06:16 PM
We need to do some simple tests.Get the speaker to...