Discussion in "Project Help" started by    sifirsekiz    Dec 12, 2018.
Wed Dec 12 2018, 01:50 PM
#1
Hi guys
I have max30100 pulse sensor
need to measure the pulse using the sensor seeing lcd beat but max30100 using ı2c
https://datasheets.maximintegrated.com/en/ds/MAX30100.pdf Datasheed max30100
can you help me? Circuit diagram and source c codes
Thu Dec 13 2018, 04:31 PM
#2
??
Fri Dec 14 2018, 05:21 PM
#3
Guys pleaseeee 🙏🏻
Fri Dec 14 2018, 11:54 PM
#4
Hi
Members can supply code and diagrams if they want to, but it is not common.
The best way would be for you to find a similar project on the web.

If you have to do it yourself, look at these tutorials about using I2C.

http://www.8051projects.net/wiki/I2C_Implementation_on_8051
http://www.8051projects.net/wiki/DS1307_I2C_RTC_Interfacing_Tutorial

Once you can use I2C we can help you add the Max30100
to a basic 8051 and LCD board.

 sifirsekiz like this.
Sat Dec 15 2018, 08:56 AM
#5


Hi
Members can supply code and diagrams if they want to, but it is not common.
The best way would be for you to find a similar project on the web.

If you have to do it yourself, look at these tutorials about using I2C.

http://www.8051projects.net/wiki/I2C_Implementation_on_8051
http://www.8051projects.net/wiki/DS1307_I2C_RTC_Interfacing_Tutorial

Once you can use I2C we can help you add the Max30100
to a basic 8051 and LCD board.


ExperimenterUK



Yes please help me
Sat Dec 15 2018, 09:02 AM
#6
and ı have pulse sensor one out but anolog use 8051 and LCD board
Can you programming for me
https://pulsesensor.com/products/pulse-sensor-amped


[ Edited Sat Dec 15 2018, 09:06 AM ]
Sat Dec 15 2018, 07:01 PM
#7
Hi
The pulse-sensor-amped has an analogue output.
The 8051 or AT89s52 does not have an A to D converter, so can't use it.
The max30100 should be okay though.

Do you have any components yet ?
Sat Dec 15 2018, 07:09 PM
#8


Hi
The pulse-sensor-amped has an analogue output.
The 8051 or AT89s52 does not have an A to D converter, so can't use it.
The max30100 should be okay though.

Do you have any components yet ?

ExperimenterUK


I have max30100 at89s52 and lcd board but ı dont have program:(
Sun Dec 16 2018, 11:13 PM
#9
Guys pleaseeeee (
Wed Dec 19 2018, 12:15 PM
#10
Nobody knows?

Get Social

Information

Powered by e107 Forum System

Conversation

Mon Jun 17 2019, 05:33 PM
charmdateapc
cooking
Sun Jun 16 2019, 07:48 PM
hanoch Taub
i need to interface sim800 to 8051, the problem is that on the module sim800 there are 9 pins connector and I don't know how to connect him to 8051, which pins to tx and rx on 8051 module sim there is
Tue May 28 2019, 07:14 PM
Ron Otsig
KBI does not work on P89LPC920 but it works on P89LPC925
Mon May 27 2019, 09:03 AM
BIJI MATHEW
Hello friends....
DragonDad
Tue May 21 2019, 03:02 PM
Hi. Who is online?
Tue May 14 2019, 12:38 AM
Jayson Contreras
Hello
Xkalebar
Sun Apr 28 2019, 09:06 AM
Please provide me the code for gsm based sms controlled notice board
ExperimenterUK
Sun Apr 14 2019, 10:52 PM
@hassan malik post your problem in the "General help Guidance and Discussion" forum
Sun Apr 14 2019, 05:06 PM
RAJESH MAPARi
please send me code to interface atmega32 with 24c1024 serial eeprom
Sun Apr 14 2019, 01:33 PM
hassan malik
hello sir i installed proteus 7.8 professional on window 7 ultimate and window 10 but there would be same errors onn both windows. the error is bad license key.please any one help me

Downloads

Comments

Easwaran22
Thu Jun 13 2019, 10:16 AM
JenniferJJ
Thu Jun 13 2019, 05:12 AM
seyoonnet
Tue Jun 04 2019, 12:37 PM
Charbel
Sun Jun 02 2019, 03:30 PM
ronotsig
Mon May 27 2019, 03:00 AM
WilsonNig
Sun May 26 2019, 03:11 AM
DragonDad
Tue May 21 2019, 02:50 PM
dhiyamtech
Thu May 09 2019, 10:20 AM

Online

Guests: 45, Members: 0 ...

most ever online: 182184
(Members: , Guests: 182184) on 06 Aug 2010: 05:37 AM

Members: 38072
Newest member: Easwaran22
Forum Activity
JenniferJJ Avatar
Posted By JenniferJJ
Thu Jun 13 2019, 05:17 AM
Hi,Hello Members,I am the newbie member, I like ve...
ExperimenterUK Avatar
Posted By ExperimenterUK
Thu May 30 2019, 08:32 PM
It occurs to me that although the P89LPC921 and P8...
ExperimenterUK Avatar
Posted By ExperimenterUK
Wed May 29 2019, 09:05 PM
I would suggest a fresh approach.The Keil compile...
ronotsig Avatar
Posted By ronotsig
Wed May 29 2019, 03:13 PM
Since the code works for the P89LPC925, it is appa...
ExperimenterUK Avatar
Posted By ExperimenterUK
Mon May 27 2019, 06:23 PM
I can't see any reason that those registers would ...
ronotsig Avatar
Posted By ronotsig
Mon May 27 2019, 03:06 AM
I am trying to using P89LPC921 or P89LPC922 in a p...
Ansh12 Avatar
Posted By Ansh12
Sun Apr 28 2019, 02:15 PM
I made a minor change, it works in Proteus.Try the...
ExperimenterUK Avatar
Posted By ExperimenterUK
Thu Apr 25 2019, 08:20 PM
I made a minor change, it works in Proteus.Try the...
gigyani Avatar
Posted By gigyani
Thu Apr 25 2019, 01:17 AM
when i add cufirst.hex its not working.after 2-3 s...
ExperimenterUK Avatar
Posted By ExperimenterUK
Wed Apr 24 2019, 12:29 AM
http://www.8051projects.net/download-d205-electron...