http://www.8051projects.net/ Learn to make simple microcontroller projects, pic, 8051, avr and arm projects. download 8051 projects, tutorials, libraries, sample codes. join the microcontroller discussion forum and ask doubts regarding electronics. the best source for 8051 over internet. Thu, 04 Dec 2008 15:46:08 -0800 http://backend.userland.com/rss092 Hi,Ajay, this is my last problem, i already solved the INput problems,for pic12f629, to enable the GPIO 4,5 , you must configure the Internal Clock an <noauthor@nospam.com> http://www.8051projects.net/forum-t9579.html after you set WR bit in EECON1 register you need to poll that bit till the writing is finished. Do not confuse writing in flash with writing to EEPROM Ajay<contact@nospam.com> http://www.8051projects.net/forum-t9579.html thank you very much Ajay...i made a statement like this,btfsc EECON1, WR;goto $-1 ;it looks fine... but the main problem still is the MPLAB SIM, when nicholastyc<thamyc_2000@nospam.com> http://www.8051projects.net/forum-t9579.html hi Ajay, wat is poll the WR bit means?i m a newbie here...please explain in asm or meaning of poll the WR bit..thanks!! nicholastyc<thamyc_2000@nospam.com> http://www.8051projects.net/forum-t9579.html polling means waiting...it can be done something like this...CODE:wait:
        btfsc EECON1,WR //skip the next statement if Ajay<contact@nospam.com> http://www.8051projects.net/forum-t9579.html try using label instead of $-1I hope it will work.. Ajay<contact@nospam.com> http://www.8051projects.net/forum-t9579.html