Discussion in "Project Help" started by    vishi    Feb 6, 2009.
Fri Feb 06 2009, 02:15 PM
#1
anyone please provide 'C' code for the following project

interfacing gsm modem with 8051. I want to send data from pc to modem via 8051 and see the message back on pc .
Fri Feb 06 2009, 02:39 PM
#2
you have to write yourself.. we will help for sure.

Get Social

Information

Powered by e107 Forum System

Conversation

Tue Mar 03 2015, 06:59 AM
candyyyy
Hi! Can i ask how do you connect the Vo contrast pin? Do i leave it open?
ExperimenterUK
Sun Mar 01 2015, 07:06 AM
@Anupam Biswas..post all you have done in the GSM forum
Sat Feb 28 2015, 02:51 PM
Anupam Biswas
I am doinga project on gsm based home automation.I have done alittle study about at commands.I am using Atmel 89c51 with yhe gsm module.I am unable to receive any message via the module.The simulation is done on proteus and i am using a virtual terminal.Can anyone please help me?Thanks in advance.
Tue Feb 24 2015, 12:47 AM
MrCurious
is Stat a global variable too? you reference it in Chan's "disk_status" function.
Sat Feb 21 2015, 09:10 PM
Harikumar
കൊള്ളാം
ExperimenterUK
Fri Feb 20 2015, 06:28 AM
@sugikz.. I have asked Ajay about it, he'll soon sort it out
Thu Feb 19 2015, 12:22 PM
sugikz
"Sorry no bots allowed! You entered two different email addresses. Please enter a valid email address in the two fields provided"
Thu Feb 19 2015, 12:21 PM
sugikz
this are the problem notice box;
Thu Feb 19 2015, 12:20 PM
sugikz
yes, i still got stuck on email problem, i've used gmail, yahoo, and told some friends of mine to sign up on the site, but they face the same problem as iam,
Thu Feb 19 2015, 05:48 AM
sjeeva
hi, is any doing a project on raspberry pi

Downloads

Comments

MALIKATIF
Mon Mar 02 2015, 04:47 PM
raamchandran
Mon Mar 02 2015, 11:20 AM
ABiDAEV
Sat Feb 28 2015, 11:31 PM
arunkollam
Wed Feb 25 2015, 05:28 AM
sugikz11
Wed Feb 25 2015, 04:23 AM
Buhari
Sun Feb 22 2015, 03:16 PM
Jarvis_v3
Sat Feb 21 2015, 02:00 AM
Sontoloyo
Thu Feb 19 2015, 12:50 PM

Online

Guests: 53, Members: 0 ...

most ever online: 182184
(Members: , Guests: 182184) on 06 Aug 2010: 05:37 AM

Members: 37591
Newest member: MALIKATIF
Forum Activity
ABiDAEV Avatar
Posted By ABiDAEV
Sun Mar 01 2015, 11:42 AM
Thanks for sharing, but can you please update the ...
sankalp_s Avatar
Posted By sankalp_s
Thu Feb 26 2015, 09:27 PM
What are you trying to make ?ExperimenterUKsir i w...
ExperimenterUK Avatar
Posted By ExperimenterUK
Thu Feb 26 2015, 12:58 AM
We seem to be moving away from the original projec...
ajay_bhargav Avatar
Posted By ajay_bhargav
Wed Feb 25 2015, 02:02 PM
You will need a 64 bytes buffer that will be writt...
PsySc0rpi0n Avatar
Posted By PsySc0rpi0n
Wed Feb 25 2015, 09:24 AM
I've already read that tutorial and almost all oth...
ajay_bhargav Avatar
Posted By ajay_bhargav
Wed Feb 25 2015, 04:56 AM
brightness control is going to be tough job as you...
ajay_bhargav Avatar
Posted By ajay_bhargav
Wed Feb 25 2015, 04:36 AM
I've already read that tutorial and almost all oth...
sankalp_s Avatar
Posted By sankalp_s
Tue Feb 24 2015, 07:18 PM
The attached code is for up to 16 LEDs.Just point ...
sankalp_s Avatar
Posted By sankalp_s
Tue Feb 24 2015, 07:16 PM
sankalp_s Avatar
Posted By sankalp_s
Tue Feb 24 2015, 07:12 PM