Discussion in "Project Doubts" started by    Rickey    Sep 20, 2006.
Sat Oct 12 2013, 08:58 PM
#41
@btulsyan, yes IP means public IP of computer where hardware is connected.

Please make sure if your PC is behind a router, you need to create virtual port or port forward 23 port number or whatever port number you are using to PC where hardware is connected.
 btulsyan like this.
Sat Oct 12 2013, 09:32 PM
#42
thank you sir for your quick response... i am using telnet and since telnet is being used i have to port forward port no. 23 (default port no. for telnet). Is there any possibility to use port no. other then 23. If yes, what else we can use and why???
Sat Oct 12 2013, 09:52 PM
#43
yes you can configure port number in application settings. I think default port number is 8888 instead of 23. Telnet gives flexibility to supply port number. So command would change to:

$ telnet IP 8888
Sun Oct 13 2013, 02:15 AM
#44
thumps up..!! I am using port no. 23 in application setting and trying to create a virtual port for port no. 23 . when i am trying to create virtual port in configuration page of my router, it is asking for the Local IP address, there i have to use default gateway IP address or public IP address... what is your opinion on this sir..


[ Edited Sun Oct 13 2013, 02:28 AM ]
Tue Oct 15 2013, 07:01 AM
#45
Sorry for late response Local IP is address of PC where server is running. Let me know it worked or not.

Get Social

Information

Powered by e107 Forum System

Conversation

Tue Jan 22 2019, 06:51 AM
chnlovelyo
writing
ExperimenterUK
Mon Jan 07 2019, 03:31 AM
@REVOCATUS please post in the AVR forum
Mon Dec 24 2018, 09:25 AM
REVOCATUS MATEMU
sorry I mean referee boards for player substitution
Mon Dec 24 2018, 09:24 AM
REVOCATUS MATEMU
hi am.looking how to build referee by using Atmega 328 and its codes
Sat Dec 15 2018, 01:45 PM
Arslan ayoub
Hii ,, can I get the simulation of numeric keypad lock on proteus
ExperimenterUK
Mon Dec 03 2018, 05:17 PM
Please post questions in the forum. The chat box is for chat
Mon Dec 03 2018, 06:43 AM
help!me!
help! I don't understand busy flag!
Sun Dec 02 2018, 08:01 PM
ile
hello
Mon Nov 12 2018, 05:58 AM
Pavan_user
i have seen your replica of I2C programming using AT89C51 but i am unable to understand the "ack_bit" variable usage ...looks like it is always 1...can you elaborate how acknowledgment is working....
bgk3678
Tue Nov 06 2018, 02:36 PM
kindly any one give solution for my problem

Downloads

Comments

garfield0929
Sun Jan 20 2019, 12:48 AM
servprov
Thu Jan 17 2019, 06:44 AM
marcomilazzo
Wed Jan 16 2019, 04:21 PM
sandhyashree
Wed Jan 16 2019, 04:04 PM
SONACHAI1234
Sun Jan 06 2019, 08:14 AM
manan.gulyaani
Tue Jan 01 2019, 07:58 AM
etech
Sun Dec 30 2018, 07:44 PM
NeilC
Sun Dec 23 2018, 07:39 PM

Online

Guests: 61, Members: 0 ...

most ever online: 182184
(Members: , Guests: 182184) on 06 Aug 2010: 05:37 AM

Members: 38039
Newest member: garfield0929
Forum Activity
ExperimenterUK Avatar
Posted By ExperimenterUK
Sun Jan 06 2019, 10:37 PM
Which 8051 chip are you using ?
SONACHAI1234 Avatar
Posted By SONACHAI1234
Sun Jan 06 2019, 08:21 AM
Hi,By mistakenly i burn rx program in my 8051 micr...
ExperimenterUK Avatar
Posted By ExperimenterUK
Wed Dec 19 2018, 06:27 PM
Nobody knows?sifirsekizThe problem is that you are...
sifirsekiz Avatar
Posted By sifirsekiz
Wed Dec 19 2018, 12:15 PM
sifirsekiz Avatar
Posted By sifirsekiz
Sun Dec 16 2018, 11:13 PM
Guys pleaseeeee :((
sifirsekiz Avatar
Posted By sifirsekiz
Sat Dec 15 2018, 07:09 PM
HiThe pulse-sensor-amped has an analogue output.Th...
ExperimenterUK Avatar
Posted By ExperimenterUK
Sat Dec 15 2018, 07:01 PM
HiThe pulse-sensor-amped has an analogue output.Th...
sifirsekiz Avatar
Posted By sifirsekiz
Sat Dec 15 2018, 09:02 AM
and ı have pulse sensor one out but anolog use 805...
sifirsekiz Avatar
Posted By sifirsekiz
Sat Dec 15 2018, 08:56 AM
HiMembers can supply code and diagrams if they wan...
ExperimenterUK Avatar
Posted By ExperimenterUK
Fri Dec 14 2018, 11:54 PM
HiMembers can supply code and diagrams if they wan...