8051 microcontroller 8051 microcontroller
Forums

Rickey's World of Microcontrollers & Microprocessors :: Forums :: GSM Discussion :: Embedded GSM Development
 
<< Previous thread | Next thread >>
T290i gprs connection
Moderators: Ajay Bhargav, Arun Kumar V, pdi33, Shailesh NAYAK, ۞ TPS ۞, shyam, sashijoseph, ExperimenterUK, DavesGarage, majoka
Author Post
turker1
Sat Jul 04 2009, 02:53PM

Registered Member #6471
Joined: Thu Mar 06 2008, 02:52AM
Location (Home Town): Turkey
Posts: 78
 Hi.I want to make gprs connection.
With hyperterminal i am getting these messages.
at+cgatt=1
OK
at+cgdcont=1,"IP","internet"
OK
at+cstt="internet","gprs","gprs"
ERROR

why error? what is the problem?
Back to top
Ajay Bhargav
Mon Jul 06 2009, 07:04AM
Rickey's World Admin


Registered Member #1
Joined: Fri Feb 24 2006, 07:56AM
Location (Home Town): Punjab, India
Posts: 12587
 I think you are using wrong command.

CSTT is for Simcom modem not for T290i mobile.

check sony erricsson command list here:

AT Command list for ALL Sony Ericsson mobile phones

check the GPRS section for correct commands.
Tags: AT Command list ALL Sony Ericsson mobile, T209 AT Command list
Back to top
 

Jump:     Back to top
Syndicate this thread: rss 0.92 Syndicate this thread: rss 2.0 Syndicate this thread: RDF
Powered by e107 Forum System
© 2010 Rickey's World
Render time: 0.0697 sec, 0.0045 of that for queries. DB queries: 34. Memory Usage: 2,750kB