Discussion in "8051 Discussion Forum" started by    erhny    Oct 11, 2007.
Thu Oct 11 2007, 09:35 AM
#1
Pls,I'm a beginner in the use of microcontroller.Dont know how one works,how it is made to work in a circuit or I just an absolute dunce and I want to start understanding dis stuff in 10 days.Pls can I just know where I can wake up from and find out that I know microcontrollers. HELP PLEASE
Thu Oct 11 2007, 09:40 AM
#2
hi
depends on what micro controller u want to start from...
if u want to start with avr there is a real helpful tutorial in this site....
before that get some basic knowledge of digital electronics... that wud help..
Thu Oct 11 2007, 10:42 AM
#3
erhny, I will start 8051 tutorial soon. Do not worry..
Thu Oct 11 2007, 11:18 AM
#4
Hi Shyam,I understand digital electronics but not much hands-on(practical)stuff been done by me.

Ajay,I'd be glad if the tutorials start soonest.Looks like I want 2 be a guru b4 1 can say Jack Robinson.

Thank you all.

Get Social

Information

Powered by e107 Forum System

Conversation

Thu Nov 21 2019, 12:30 PM
raj2555
how to interface 8051 microcontroller with NRF24L01+ module
ExperimenterUK
Sat Oct 12 2019, 10:23 PM
Log in.. then post your code in the 8051 forum
Sat Oct 12 2019, 10:18 AM
Bhadra Sajikumar
i am doing a countdown timer with 8051 for my project, unfortunately our professor had to take a leave of absence before he could teach us most of it.. can someone explain the .asm code of it for me?
Mon Sep 23 2019, 07:37 AM
Nathaniel
I am doing a project for my schools wireless security system with cameras,sensors and spot lights using 8051 micro controller, could you help me out with the design and its source code.
Wed Sep 18 2019, 08:48 PM
Caryn Kover
Thank you for your time,
ExperimenterUK
Mon Aug 05 2019, 07:09 PM
@Ismail ..post in forum, give details
Mon Aug 05 2019, 04:33 PM
Ismail balghmi
Hello. Please I won't download
ExperimenterUK
Wed Jul 24 2019, 12:47 AM
@BUSTER123 Please post in the forum
Tue Jul 23 2019, 06:13 PM
BUSTER123
hello! newbie here. i am kind of a guy who hates using ready - made existing libraries, so this helped a lot as i was trying to control and write to a character lcd display. however, i can't figure out how to set the cursor position. for example, i want to set it to the 5th column in the first row, so position 5. so according to the table, i am sending 10000101 on the 8 data lines of the lcd (register select pulled low). the cursor does not move there however. and i cant move the cursor left or right too. is it something wrong that i am doing? thank you.
ExperimenterUK
Thu Jul 11 2019, 07:55 PM
@ramos https://www.theengineeringprojects.com/2017/09/l298-motor-driver-library-proteus.html

Downloads

Comments

auwal
Tue Nov 19 2019, 03:13 PM
ANKITPATEL
Mon Nov 18 2019, 11:00 AM
Casmir
Wed Nov 13 2019, 06:25 AM
DeepakBGattani
Mon Nov 11 2019, 01:31 PM
Jeanbusatta
Sun Nov 10 2019, 04:42 AM
mdayaz
Sat Nov 09 2019, 03:41 PM
baoyen123
Fri Nov 08 2019, 10:06 AM
xiwang
Fri Nov 08 2019, 07:28 AM

Online

Guests: 127, Members: 0 ...

most ever online: 182184
(Members: , Guests: 182184) on 06 Aug 2010: 05:37 AM

Members: 38105
Newest member: auwal
Forum Activity
ExperimenterUK Avatar
Posted By ExperimenterUK
Tue Nov 19 2019, 10:44 PM
The 8051 has too little memory to do anything us...
ilylily07 Avatar
Posted By ilylily07
Mon Nov 18 2019, 09:54 AM
0v7670 camera interfacing with stc 8051.using asse...
Jeanbusatta Avatar
Posted By Jeanbusatta
Sun Nov 10 2019, 04:43 AM
ty, really needed it
ExperimenterUK Avatar
Posted By ExperimenterUK
Tue Oct 22 2019, 05:18 AM
wimac Avatar
Posted By wimac
Mon Oct 21 2019, 09:18 AM
I’ve been following this thread and looking at the...
s_dinesh40@yahoo.com Avatar
Posted By [email protected]
Sun Oct 20 2019, 03:09 PM
s_dinesh40@yahoo.com Avatar
Posted By [email protected]
Sun Oct 20 2019, 03:02 PM
sir, when i on display ,sometime 3rd display is no...
s_dinesh40@yahoo.com Avatar
Posted By [email protected]
Sun Oct 20 2019, 02:53 PM
sir, when i on display ,sometime 3rd display is no...
ExperimenterUK Avatar
Posted By ExperimenterUK
Sun Oct 20 2019, 12:21 AM
Your code seems okay on my simulationTry my code o...
s_dinesh40@yahoo.com Avatar
Posted By [email protected]
Sat Oct 19 2019, 07:13 PM
please find video attachment. 3rd & 4th displa...