Discussion in "Project Addition or Changes" started by    Shehwar    Aug 19, 2011.
Sat Oct 08 2011, 04:10 PM
#41
@ Shehwar
define some more about your problem
ru want to use multiples for this project
may be u need a change in code
Mon Oct 10 2011, 10:48 AM
#42
can i use the multipattern led program given on this forum ?
Also for that project what is the circuit assembly ?
Mon Oct 10 2011, 03:53 PM
#43
@ Shehwar
for multi pattern u has to change the code as it is only for a single pattern that u see in photos

Get Social

Information

Powered by e107 Forum System

Conversation

Thu May 21 2015, 01:04 AM
utpal
i am a hobbist. i work on 8051. just i have started with pic 16f877. but a bitter experiance is going on. as i am programming any code to my pic877 and putting it in my board and it is working, but the 2nd time it is not taking any program,I have experimented just 7 new one pic mcus. result is the same. please tell me the reason. my programmer is TOP3000(universal programmer).
ajay_bhargav
Wed May 20 2015, 04:48 AM
@lak you can use the same code provided you are not using any s52 specific ports and registers.
Mon May 18 2015, 05:58 AM
lak
i used to develop a code for at89s52 shall i use the same code for at89c4051
Sun May 17 2015, 07:57 AM
Ayoosh
what if i have to rotate motor continuously at a step angle of 1.8 degree
ExperimenterUK
Fri May 15 2015, 06:02 PM
@oracle1946.. Post your question in the PIC forum
Fri May 15 2015, 03:48 AM
nadeem232
if some has solution kindly share solution Principles of Electric Circuits,by Thomas L. Floyd
oracle1946
Thu May 14 2015, 03:39 PM
I want to build a PIC16F684 sun logger using either a solar cell (0.5v solar cell or photoresistor). Any help out there?
Thu May 14 2015, 11:59 AM
Ramprasad Malviya
please sir send me moving led display programming in asm&c language
ajay_bhargav
Thu May 14 2015, 04:43 AM
@bach please post in forum and let us know which software are you using
Tue May 12 2015, 10:25 AM
bach
hi guys, im kinda new to all of this. im looking for a splice model of the l293 IC and would be very appreciative if someone can point me in the right direction.

Downloads

Comments

as_rog
Sun May 17 2015, 08:00 AM
oracle1946
Thu May 14 2015, 03:34 PM
kakaru32
Tue May 12 2015, 04:29 PM
Yateesh
Sat May 09 2015, 02:46 AM
scmg
Fri May 08 2015, 06:40 PM
OMERO
Fri May 08 2015, 11:53 AM
Carlos55
Fri May 08 2015, 02:14 AM
osman6464
Thu May 07 2015, 02:38 PM

Online

Guests: 56, Members: 0 ...

most ever online: 182184
(Members: , Guests: 182184) on 06 Aug 2010: 05:37 AM

Members: 37657
Newest member: as_rog
Forum Activity
mayank058 Avatar
Posted By mayank058
Thu May 21 2015, 04:46 AM
dear sir there is nothing to zip.I just...
ajay_bhargav Avatar
Posted By ajay_bhargav
Wed May 20 2015, 04:57 AM
can you zip your complete project and attach it he...
ajay_bhargav Avatar
Posted By ajay_bhargav
Wed May 20 2015, 04:46 AM
If you know how to drive 7-seg using an 8-bit port...
ajay_bhargav Avatar
Posted By ajay_bhargav
Wed May 20 2015, 04:42 AM
There was no proteus file included in the package,...
ankitbajaj01 Avatar
Posted By ankitbajaj01
Tue May 19 2015, 07:00 AM
Hello ExperimenterUK...Please guide me on above po...
mayank058 Avatar
Posted By mayank058
Tue May 19 2015, 04:54 AM
Sir I want to measure the analog signal on CRO.
ElectronicManiac Avatar
Posted By ElectronicManiac
Mon May 18 2015, 07:52 PM
There was no proteus file included in the package,...
ExperimenterUK Avatar
Posted By ExperimenterUK
Mon May 18 2015, 04:16 PM
Does the speaker work?.'Exactly' where on the boa...
mayank058 Avatar
Posted By mayank058
Mon May 18 2015, 06:01 AM
dear sir, when I use your code on the...
Rakesh_suthar Avatar
Posted By Rakesh_suthar
Sun May 17 2015, 05:42 AM
hi ,I am working rtc by avr with seven segment .bu...