Flash-X programmer Software
Wed Feb 20 2008, 03:02 pm
Hello all,
I required Flash-X programmer Software ..
It is for 8-bit MCU program loader like AT89S52,AT89S8252,etc...
Thank you....
I required Flash-X programmer Software ..
It is for 8-bit MCU program loader like AT89S52,AT89S8252,etc...
Thank you....
Mon Feb 25 2008, 08:45 am
Hello,
Actually I required software which support AT89S52,AT89S8252,AT89C55WD,AT89C51RC2,AT89C51RD2...
Thank you for help me....
Actually I required software which support AT89S52,AT89S8252,AT89C55WD,AT89C51RC2,AT89C51RD2...
Thank you for help me....
Tue Feb 26 2008, 12:02 am
here is one i know and use...
http://www.kmitl.ac.th/~kswichit%20/Pgm89v31_web/Pgm89v31.html
RC2 and RD2 doesn't need a special programmer i guess.. they have ISP feature.
http://www.kmitl.ac.th/~kswichit%20/Pgm89v31_web/Pgm89v31.html
RC2 and RD2 doesn't need a special programmer i guess.. they have ISP feature.
Fri Feb 29 2008, 09:01 am
Hi Ajay,
I check PGM89 Flash programmer which you suggest me.But it is not support my programmer circuit..
Here i attach my programmer cicuit..
I have serial port for communication in this circuit...
I check PGM89 Flash programmer which you suggest me.But it is not support my programmer circuit..
Here i attach my programmer cicuit..
I have serial port for communication in this circuit...
Fri Feb 29 2008, 01:15 pm
well you must consult your programmer manufacturer then... only he can provide you the software, because most of the time programmer softwares are custom designed. That means according to the hardware being used. You must mail or call the vendor/manufacturer of your programmer.
Fri Feb 29 2008, 01:50 pm
I just checked your hardare, its ISP programmer circuit. I have no idea which software will support those connections. and it use parallel port only not serial/COM port.
My suggestion is follow what atmel says...
if you want you can use this circuit:
and you can make use of this software to program you 89S series ICs.
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=2877
My suggestion is follow what atmel says...
if you want you can use this circuit:
and you can make use of this software to program you 89S series ICs.
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=2877
Fri Feb 29 2008, 02:33 pm
The programmer is the same as this one : http://www.kmitl.ac.th/~kswichit%20/IspPgm30a/ISP-Pgm30a.html
except pin 9 of parallel port is used instead of pin8.
So make that change and use the ISP-Pgm software.
except pin 9 of parallel port is used instead of pin8.
So make that change and use the ISP-Pgm software.
Powered by e107 Forum System