Sending EMAIL using SIM900D
Thu Jul 31 2014, 12:15 am
@ sermeteray
thank you for sharing your experience
i finaly was done it but that way was very lengthy
i will try your suggestion soon as i get a modem
i also upgrade at that time also but don't know where the problem was
anyhow thank you very much
thank you for sharing your experience
i finaly was done it but that way was very lengthy
i will try your suggestion soon as i get a modem
i also upgrade at that time also but don't know where the problem was
anyhow thank you very much
Sun Aug 10 2014, 12:07 am
@ sermeteray
from where i can get the firmware versionsmajoka
Hi Majoka
I have attached the email versions of firware (two are working)
good work
sermet
Sun Aug 10 2014, 11:14 pm
@ sermeteray
thank you very much
i am trying to get help about simcom but processing is slow
the attached versions are for sim900 or sim900d
as i have sim900d now i am trying to ask from simcom that for sim900d which version will work but i am not getting a favorable answers
Regards
Naseem
thank you very much
i am trying to get help about simcom but processing is slow
the attached versions are for sim900 or sim900d
as i have sim900d now i am trying to ask from simcom that for sim900d which version will work but i am not getting a favorable answers
Regards
Naseem
Sun Nov 02 2014, 03:38 pm
[left]Hello every one
i am able to send an email using gsm modem
i have a gsm modem sim900D
it has a firmware version
SIMCOM_Ltd
SIMCOM_SIM900D
Revision:1137B09SIM900D64_ST
thank you sermeteray that point out my mistake in the sequence of AT command i was missing one command that is AT+EMAILSSL=1
now my sequence of command is as following
AT
OK
AT+SAPBR=3,1,"CONTYPE","GPRS"
OK
AT+SAPBR=3,1,"APN","zonginternet"
OK
AT+SAPBR=3,1,"USER",""
OK
AT+SAPBR=3,1,"PWD",""
OK
AT+SAPBR=1,1
OK
AT+SAPBR=2,1
+SAPBR: 1,1,"10.23.192.139"
OK
AT+EMAILCID=1
OK
AT+EMAILTO=30
OK
AT+EMAILSSL=1
OK
AT+SMTPSRV="smtp.mail.yahoo.com",465
OK
AT+SMTPAUTH=1,"[email protected]","xxxxx"
OK
AT+SMTPFROM="[email protected]","naseem"
OK
AT+SMTPRCPT=0,0,"[email protected]","majoka"
OK
AT+SMTPSUB="Test"
OK
AT+SMTPBODY
> THIS IS A NEW EMAIL (ctrl+z)
OK
AT+SMTPSEND
OK
+SMTPSEND: 1
here is the attached file for reference
Thank you so much for all that help me
i am able to send an email using gsm modem
i have a gsm modem sim900D
it has a firmware version
SIMCOM_Ltd
SIMCOM_SIM900D
Revision:1137B09SIM900D64_ST
thank you sermeteray that point out my mistake in the sequence of AT command i was missing one command that is AT+EMAILSSL=1
now my sequence of command is as following
AT
OK
AT+SAPBR=3,1,"CONTYPE","GPRS"
OK
AT+SAPBR=3,1,"APN","zonginternet"
OK
AT+SAPBR=3,1,"USER",""
OK
AT+SAPBR=3,1,"PWD",""
OK
AT+SAPBR=1,1
OK
AT+SAPBR=2,1
+SAPBR: 1,1,"10.23.192.139"
OK
AT+EMAILCID=1
OK
AT+EMAILTO=30
OK
AT+EMAILSSL=1
OK
AT+SMTPSRV="smtp.mail.yahoo.com",465
OK
AT+SMTPAUTH=1,"[email protected]","xxxxx"
OK
AT+SMTPFROM="[email protected]","naseem"
OK
AT+SMTPRCPT=0,0,"[email protected]","majoka"
OK
AT+SMTPSUB="Test"
OK
AT+SMTPBODY
> THIS IS A NEW EMAIL (ctrl+z)
OK
AT+SMTPSEND
OK
+SMTPSEND: 1
here is the attached file for reference
Thank you so much for all that help me
Powered by e107 Forum System