Discussion in "GSM and CDMA Discussion" started by    dodul    Nov 24, 2014.
Mon Nov 24 2014, 10:11 PM
#1
I know its a bit off topic. But, any help would be highly appreciated. We are using Falcom Tango 55i modem, The problem with this modem doesnt support CMMS. We are planning to replace our modem. Can you guys please suggest any good vendor/model with CMMS support that we can purchase.

Thanks in advanced


[ Edited Mon Nov 24 2014, 10:12 PM ]
Wed Nov 26 2014, 02:33 AM
#2
I assume you mean CMMS as in AT+CMMS, something to do with
sending multiple SMS messages.

I'm afraid I can't recommend any modems.
You could just get check the AT command set for any modem you are considering.

This feature seems to be non standard,so even if the modem has it,
the networks may not allow it, so it is best avoided.


[ Edited Wed Nov 26 2014, 05:20 AM ]
Wed Nov 26 2014, 04:30 PM
#3
Hi,

Thanks a lot for your reply. Yes i was referring to AT+CMMS command. Basically the problem is, our present modem can send max 1 sms/6 sec. which is pretty low for us. We added extra modems for sending more SMS. However, it would be lot better if we can find a modem that can send in a higher rate. So if you can suggest a modem that can send like 1 msg per second or 1 msg per 3 seconds that would be helpful too.

Thanks
D
Wed Nov 26 2014, 06:36 PM
#4
I never tried sending SMS messages at a high rate,so I don't know.
However, I can't see way a modem would struggle, 6 seconds seems a long time !

It may be the network provider that is limiting things
or even your sending software.
Check with your network provider that they are not the problem.

Get Social

Information

Powered by e107 Forum System

Conversation

hareeshchamiyar
Thu Mar 29 2018, 10:47 AM
please help me for the configuration bits for dspic30f2010
hareeshchamiyar
Thu Mar 29 2018, 10:45 AM
can any one using dspic30f2010.
Thu Mar 29 2018, 06:03 AM
Neena
can anybody give solar tracking in 8051 using proteus and keil to mail [email protected]
ExperimenterUK
Mon Mar 19 2018, 07:33 PM
sorry bedo.. maybe next time
Sun Mar 18 2018, 07:48 AM
Mourya Manojkumar
Please send me circuit diagram and PCB diagram
Thu Mar 01 2018, 05:49 AM
Felixc
May you please help me with a code for programmable load shedding controlling 4 loads
Sun Feb 25 2018, 08:29 PM
ezeoke.charles
i need of it
Sat Feb 24 2018, 03:35 AM
Aaquib
I want help for digital ic tester
ExperimenterUK
Tue Feb 20 2018, 04:01 PM
Join up.. and post your problem
Mon Feb 19 2018, 11:17 AM
ashishkumar
i needs help for my project

Downloads

Comments

jamiel
Sat Apr 14 2018, 12:47 AM
akrepkral76
Wed Apr 04 2018, 07:51 PM
samanthaeaves
Mon Apr 02 2018, 06:27 AM
rana2056
Sat Mar 31 2018, 02:11 PM
Darshanparabbnb
Mon Mar 26 2018, 07:17 AM
marttinsmarcio
Sat Mar 24 2018, 12:31 PM
LAMBO
Tue Mar 20 2018, 09:51 AM
bedo123
Mon Mar 19 2018, 07:48 AM

Online

Guests: 66, Members: 0 ...

most ever online: 182184
(Members: , Guests: 182184) on 06 Aug 2010: 05:37 AM

Members: 37993
Newest member: jamiel
Forum Activity
ExperimenterUK Avatar
Posted By ExperimenterUK
Mon Apr 16 2018, 08:49 PM
On the diagram, a diode feeds a rectified sine wav...
LAMBO Avatar
Posted By LAMBO
Mon Apr 16 2018, 06:39 AM
Hi sir i haven't connected any serial connec...
ExperimenterUK Avatar
Posted By ExperimenterUK
Fri Apr 13 2018, 02:09 AM
I assume you are doing this project.http://www.805...
LAMBO Avatar
Posted By LAMBO
Thu Apr 12 2018, 06:51 PM
hii sir,I am working on ac motor controller .I hav...
ExperimenterUK Avatar
Posted By ExperimenterUK
Tue Apr 10 2018, 06:12 PM
The lpc214x has a 32-bit prescaler , so I would ...
Praneeth1299 Avatar
Posted By Praneeth1299
Tue Apr 10 2018, 09:16 AM
Hi,I'm generating constant frequency of 1hz and va...
akrepkral76 Avatar
Posted By akrepkral76
Sat Apr 07 2018, 01:57 PM
I have used diptrace.I think ı have recevied from ...
ExperimenterUK Avatar
Posted By ExperimenterUK
Sat Apr 07 2018, 01:45 AM
You will need to say which software you are using,...
akrepkral76 Avatar
Posted By akrepkral76
Fri Apr 06 2018, 12:22 PM
I have drawed many PCB board. But it is still not ...
ExperimenterUK Avatar
Posted By ExperimenterUK
Wed Apr 04 2018, 10:49 PM
Do you have a working HM2007 board as shown in the...