Discussion in "General help Guidance and Discussion" started by    whoami    Mar 17, 2016.
Thu Mar 17 2016, 05:11 AM
#1
Hi, I'm having a problem about 74ls96 5-bit shift registers, the functions seems wrong.
When I try to make the clear/preset to 00 and 10 work fines
but when clear/preset is 01 the function should allow the q point to follow their respective inputs to a 1 or 0 and it's not happening also when the clear/preset is 11 it allows the q point to follow their respective inputs from a 0 to a 1 but not from a 1 to 0,
please help thanks.
sorry for the grammar.
Thu Mar 17 2016, 08:10 PM
#2
Your grammar is fine.

Please post a Proteus file to demonstrate your problem.
 whoami like this.
Sat Mar 19 2016, 04:06 AM
#3
Thank You


[ Edited Sat Mar 19 2016, 04:08 AM ]
Sat Mar 19 2016, 04:06 AM
#4


Your grammar is fine.

Please post a Proteus file to demonstrate your problem.

ExperimenterUK



Sir, I have another question, is the 74ls96 can only shift right? if yes how can i prove to my professor that it can't shift to the left ? Cause some of my classmates said that it can't then my professor said that if he can make it shift to the left he'll give them a failing grade. It is possible to make it shift left by adding some gates, and still I can insert 1 or 0 when shifting ? Thank you.
Sat Mar 19 2016, 09:47 PM
#5
As I see it, the 74LS96 can only shift from input (pin 9)
to output 15 then 14 then 13 then 11 then 10.

I don't know if you call that a right shift or a left shift,
but it can only go one way.
Even after a parallel load the shift is in the same direction.

Adding extra gates could do anything to the output,
but it does not alter the action of the 74lLS96

Let us know if you get a fail
 whoami like this.
Sun Mar 20 2016, 03:35 AM
#6


As I see it, the 74LS96 can only shift from input (pin 9)
to output 15 then 14 then 13 then 11 then 10.

I don't know if you call that a right shift or a left shift,
but it can only go one way.
Even after a parallel load the shift is in the same direction.

Adding extra gates could do anything to the output,
but it does not alter the action of the 74lLS96

Let us know if you get a fail

ExperimenterUK



Someone told me, to look at the data sheet of 74ls95 for some clues. I tried the 74ls95 and it shifts to the left by connecting Q3 to D2, Q2 to D1, Q1 to D0 and Serial in to D3, when I try to do the same thing with 74ls96 it still shifts to the right, maybe it's because when the Clear is 1 and the Preset is 1 it disable the changes from the Q points, and I can't change the Clear and Preset because it only shifts when it's 0 and 1 respectively. What should I do ? :c I just can't think of a way to make it shift like the 74LS95 do. . Thanks you sir for all the help. .


[ Edited Sun Mar 20 2016, 05:03 AM ]
Sun Mar 20 2016, 09:57 PM
#7


Someone told me, to look at the data sheet of 74ls95 for some clues.

whoami


Looks like your friend was right, the clue is in the data sheet.

This 74LS95 data sheet describes how to make it shift left, which it can't
really do.

The trick is to connect the outputs, to the load input, but one place out,
so QD to input C etc.
Then as the device is clocked, the pattern is shifted to the left.


Attachment
Mon Mar 21 2016, 12:51 AM
#8



Someone told me, to look at the data sheet of 74ls95 for some clues.

whoami


Looks like your friend was right, the clue is in the data sheet.

This 74LS95 data sheet describes how to make it shift left, which it can't
really do.

The trick is to connect the outputs, to the load input, but one place out,
so QD to input C etc.
Then as the device is clocked, the pattern is shifted to the left.


Attachment

ExperimenterUK




In my case that's not happening . I've tried that but I can't make changes to the inputs so me connecting QD to input C won't do anything, it still shifts to the right . So, the 74ls96 can't really shift to the left ?
Mon Mar 21 2016, 09:02 AM
#9
I have not tried the parallel load method, but I assume it works.
Although that means the 7496 can be made to act as a left shift register
I don't think it is really a proper left shift register.
Most parallel load device could do the same thing.
 whoami like this.
Mon Mar 21 2016, 09:35 AM
#10
Sir, do you have any idea on how can I make it act as a left shift register ? Is it by parallel loading ? then how to make it shift ? it only shifts when the clear is low and preset is low right ? Thank you.

Get Social

Information

Powered by e107 Forum System

Conversation

Mon Nov 12 2018, 05:58 AM
Pavan_user
i have seen your replica of I2C programming using AT89C51 but i am unable to understand the "ack_bit" variable usage ...looks like it is always 1...can you elaborate how acknowledgment is working....
bgk3678
Tue Nov 06 2018, 02:36 PM
kindly any one give solution for my problem
ExperimenterUK
Mon Nov 05 2018, 09:48 PM
Pins high is the normal state. You need a program to set them low
mayengbam
Sun Nov 04 2018, 05:41 PM
hello, i am niranjoy, alll the port of my 8051 is always high, even i erase all the program. why is it so happen and what is the problem. any one please help me!
Sun Nov 04 2018, 02:16 PM
BASAVARAJ g kudamble
hi I am interfacing GSM 300 to 8051 microcontroller to receive message from mobile
ExperimenterUK
Sat Sep 29 2018, 06:28 PM
Please post questions in the forum.
Sat Sep 29 2018, 11:26 AM
Ashfaq Ch
hi i have some AT89C51RC microcontrollers already programed. some one help us to how to download from AT89C51RC and after study and edit all corractions reload to AT89C51RC controller
shshistiem
Wed Sep 12 2018, 10:58 PM
hii!! some1 please let me know how i ll get rfid code to 8051 by WEIGAND mode
DrNossberg
Tue Sep 11 2018, 08:09 PM
is there anyone here?
Mon Aug 27 2018, 07:30 AM
bun
Hello everyone´╝ü

Downloads

Comments

atalnet
Fri Nov 16 2018, 07:44 AM
genius784
Wed Nov 14 2018, 09:25 AM
katherineamt
Mon Nov 12 2018, 03:14 PM
wimac
Sun Nov 11 2018, 03:36 PM
suryanspn
Sat Nov 10 2018, 02:52 AM
RubenMarques
Tue Nov 06 2018, 06:35 PM
mayengbam
Sun Nov 04 2018, 05:36 PM
bgk3678
Sun Nov 04 2018, 02:27 PM

Online

Guests: 83, Members: 0 ...

most ever online: 182184
(Members: , Guests: 182184) on 06 Aug 2010: 05:37 AM

Members: 38021
Newest member: atalnet
Forum Activity
ExperimenterUK Avatar
Posted By ExperimenterUK
Mon Nov 19 2018, 01:11 AM
ExperimenterUK Avatar
Posted By ExperimenterUK
Thu Nov 15 2018, 06:48 PM
Unfortunately I have no experience of LabView,but ...
katherineamt Avatar
Posted By katherineamt
Mon Nov 12 2018, 03:22 PM
I have never used LabView and I have to implement ...
ExperimenterUK Avatar
Posted By ExperimenterUK
Mon Nov 12 2018, 01:21 AM
wimac Avatar
Posted By wimac
Sun Nov 11 2018, 04:03 PM
bgk3678 Avatar
Posted By bgk3678
Sun Nov 11 2018, 07:25 AM
ExperimenterUK Avatar
Posted By ExperimenterUK
Tue Nov 06 2018, 06:10 PM
bgk3678 Avatar
Posted By bgk3678
Sun Nov 04 2018, 02:52 PM
bgk3678 Avatar
Posted By bgk3678
Sun Nov 04 2018, 02:48 PM
Xuenan Avatar
Posted By Xuenan
Sat Nov 03 2018, 01:08 PM
Make the 8051 frequency exactly 11.0592 MHz in pro...