Discussion in "New Ideas regarding projects" started by    CELEBI    May 12, 2016.
Thu May 12 2016, 08:53 AM
#1
Hello Guys, I want to make a Project with 89s51 but İ do not know how to make. I want to control 48 pieces relay using one 89s51. 8 relay will be activated by 1.5 sec waintg. Immediately after the other 8 pieces relay will be activated. So, 48 pieces relay will be activated with 1.5 sec waiting.This process was done than Program will be returned to the head.a summary, 48 pieces relay will be activated with 1.5 sec waintg and I can change the waiting period(1.5 sec ), if possible.Already, thanss..
Thu May 12 2016, 05:20 PM
#2
Sorry I don't understand what you want.

Is that 1.5 seconds between each relay, so a cycle lasts 72 seconds,
or do the relays come on 8 at a time, so a cycle lasts 9 seconds ?

Fri May 13 2016, 06:16 AM
#3
Yes. It must be as you said. It must be 1.5 seconds between each relay. And I can change waiting time(1.5 seconds) when i want.
Fri May 13 2016, 07:59 PM
#4
If you want only one relay to be on at a time the simplest way would be a set
of decade counters such as the 4017 or the 7490.

The 89s51 would only have pulse each decade counter every 1.5 seconds.
See this explanation
http://www.doctronics.co.uk/4017.htm


What are you using the relays for ?


[ Edited Mon May 16 2016, 05:42 PM ]

Get Social

Information

Powered by e107 Forum System

Conversation

hareeshchamiyar
Thu Mar 29 2018, 10:47 AM
please help me for the configuration bits for dspic30f2010
hareeshchamiyar
Thu Mar 29 2018, 10:45 AM
can any one using dspic30f2010.
Thu Mar 29 2018, 06:03 AM
Neena
can anybody give solar tracking in 8051 using proteus and keil to mail [email protected]
ExperimenterUK
Mon Mar 19 2018, 07:33 PM
sorry bedo.. maybe next time
Sun Mar 18 2018, 07:48 AM
Mourya Manojkumar
Please send me circuit diagram and PCB diagram
Thu Mar 01 2018, 05:49 AM
Felixc
May you please help me with a code for programmable load shedding controlling 4 loads
Sun Feb 25 2018, 08:29 PM
ezeoke.charles
i need of it
Sat Feb 24 2018, 03:35 AM
Aaquib
I want help for digital ic tester
ExperimenterUK
Tue Feb 20 2018, 04:01 PM
Join up.. and post your problem
Mon Feb 19 2018, 11:17 AM
ashishkumar
i needs help for my project

Downloads

Comments

jamiel
Sat Apr 14 2018, 12:47 AM
akrepkral76
Wed Apr 04 2018, 07:51 PM
samanthaeaves
Mon Apr 02 2018, 06:27 AM
rana2056
Sat Mar 31 2018, 02:11 PM
Darshanparabbnb
Mon Mar 26 2018, 07:17 AM
marttinsmarcio
Sat Mar 24 2018, 12:31 PM
LAMBO
Tue Mar 20 2018, 09:51 AM
bedo123
Mon Mar 19 2018, 07:48 AM

Online

Guests: 48, Members: 0 ...

most ever online: 182184
(Members: , Guests: 182184) on 06 Aug 2010: 05:37 AM

Members: 37993
Newest member: jamiel
Forum Activity
ExperimenterUK Avatar
Posted By ExperimenterUK
Mon Apr 16 2018, 08:49 PM
On the diagram, a diode feeds a rectified sine wav...
LAMBO Avatar
Posted By LAMBO
Mon Apr 16 2018, 06:39 AM
Hi sir i haven't connected any serial connec...
ExperimenterUK Avatar
Posted By ExperimenterUK
Fri Apr 13 2018, 02:09 AM
I assume you are doing this project.http://www.805...
LAMBO Avatar
Posted By LAMBO
Thu Apr 12 2018, 06:51 PM
hii sir,I am working on ac motor controller .I hav...
ExperimenterUK Avatar
Posted By ExperimenterUK
Tue Apr 10 2018, 06:12 PM
The lpc214x has a 32-bit prescaler , so I would ...
Praneeth1299 Avatar
Posted By Praneeth1299
Tue Apr 10 2018, 09:16 AM
Hi,I'm generating constant frequency of 1hz and va...
akrepkral76 Avatar
Posted By akrepkral76
Sat Apr 07 2018, 01:57 PM
I have used diptrace.I think ı have recevied from ...
ExperimenterUK Avatar
Posted By ExperimenterUK
Sat Apr 07 2018, 01:45 AM
You will need to say which software you are using,...
akrepkral76 Avatar
Posted By akrepkral76
Fri Apr 06 2018, 12:22 PM
I have drawed many PCB board. But it is still not ...
ExperimenterUK Avatar
Posted By ExperimenterUK
Wed Apr 04 2018, 10:49 PM
Do you have a working HM2007 board as shown in the...