Discussion in "Project Addition or Changes" started by    Helia    Feb 9, 2017.
Thu Feb 09 2017, 10:28 AM
#1
Hi
I require help in gsm based project coding using 8051 assembly coding.
The code is about reading message and then displaying that message on lcd
Could anyone please help me?
I have written the code for it but, the message does not get displayed on the lcd .
however the code works on proteus.
Thu Feb 09 2017, 10:42 AM
#2
Here is the code about which I was talking about in the previous post
Kindly check whats wrong with the code


[ Edited Thu Feb 09 2017, 10:44 AM ]
Thu Feb 09 2017, 08:00 PM
#3
Your code did not attach.
Add your code and Proteus file to a zip file and post it.
Thu Feb 09 2017, 08:57 PM
#4
code
Thu Feb 09 2017, 08:59 PM
#5
code

Thu Feb 09 2017, 09:15 PM
#6
Proteus file
Fri Feb 10 2017, 01:13 AM
#7
Hi
What you have posted are .docx files.
To help I/we need the actual asm code and the Proteus project file to run.

Fri Feb 10 2017, 08:18 AM
#8
Very sorry
Attachment
Fri Feb 10 2017, 08:30 AM
#9
Here is the Proteus file
Attachment
Fri Feb 10 2017, 10:58 AM
#10
Below are the attachments
I have attached the Asm and hex file

Get Social

Information

Powered by e107 Forum System

Conversation

Fri Jul 19 2019, 10:33 AM
charmdatedhd
cooking
ExperimenterUK
Thu Jul 11 2019, 07:55 PM
@ramos https://www.theengineeringprojects.com/2017/09/l298-motor-driver-library-proteus.html
ExperimenterUK
Thu Jul 11 2019, 07:44 PM
@praveen123. Can you give a link to the project ?
Thu Jul 11 2019, 04:47 PM
ramos
buenos dias alguien podria ayudarme necesito saber como descargar la libreria del l298n para proteus
Thu Jul 11 2019, 11:11 AM
praveen123
anyone can help me
Thu Jul 11 2019, 11:11 AM
praveen123
i need source code for 8051 -smart trolley rfid
Thu Jul 11 2019, 11:10 AM
praveen123
hii
ExperimenterUK
Thu Jun 27 2019, 09:14 PM
Hi.. good to see you again
۞ TPS ۞
Thu Jun 27 2019, 07:31 AM
Hello
AdiGhazi
Tue Jun 18 2019, 11:21 AM
Hlo Dear , I've to program AT89C51AC3 RT-LUM using flip but I'm getting time out error for RS232. Will you please suggest me which programmer will be supportable to program this Chip.

Downloads

Comments

rpels7707
Fri Jul 19 2019, 11:31 AM
ameya123
Fri Jul 19 2019, 07:36 AM
anhsieuno
Thu Jul 18 2019, 11:39 AM
zxcvbnm1234
Sat Jul 13 2019, 07:09 AM
surajghayal
Wed Jul 10 2019, 01:17 PM
figureyang
Fri Jul 05 2019, 04:25 AM
mousompal
Sat Jun 29 2019, 05:02 PM
AdiGhazi
Tue Jun 18 2019, 11:15 AM

Online

Guests: 52, Members: 0 ...

most ever online: 182184
(Members: , Guests: 182184) on 06 Aug 2010: 05:37 AM

Members: 38080
Newest member: rpels7707
Forum Activity
ameya123 Avatar
Posted By ameya123
Fri Jul 19 2019, 07:42 AM
Hello,Please share 8051 Assembly language code for...
figureyang Avatar
Posted By figureyang
Fri Jul 05 2019, 04:37 AM
here is the source code prepared for you download ...
figureyang Avatar
Posted By figureyang
Fri Jul 05 2019, 04:30 AM
Cheap_Flash_FS(Normal Version)--Embedded FAT16/32 ...
wimac Avatar
Posted By wimac
Sat Jun 22 2019, 01:26 PM
I’ve use the AT89C51ED2 which has a similar progra...
ExperimenterUK Avatar
Posted By ExperimenterUK
Thu Jun 20 2019, 10:08 PM
baud rate is 9600 at stop bits of 2. AdiGhaziThe u...
AdiGhazi Avatar
Posted By AdiGhazi
Thu Jun 20 2019, 05:24 AM
Dear,I'm using RS232 serial port cable to use flip...
ExperimenterUK Avatar
Posted By ExperimenterUK
Tue Jun 18 2019, 10:19 PM
Okay.. I have never programmed the AT89C51AC3 or ...
AdiGhazi Avatar
Posted By AdiGhazi
Tue Jun 18 2019, 11:20 AM
Hlo Dear ,I've to program AT89C51AC3 RT-LUM using ...
ExperimenterUK Avatar
Posted By ExperimenterUK
Thu May 30 2019, 08:32 PM
It occurs to me that although the P89LPC921 and P8...
ExperimenterUK Avatar
Posted By ExperimenterUK
Wed May 29 2019, 09:05 PM
I would suggest a fresh approach.The Keil compile...