Discussion in "Project Doubts" started by    Sudhansudeep    Aug 31, 2018.
Wed Sep 05 2018, 03:20 AM
#11
I just changed the mobile number and I have changed nothing else. And how to change status messages
Wed Sep 05 2018, 03:46 AM
#12
sir i have used the 5th version also there is no error now but it is showing the following mesage when i building the target
Program size: data=180.5 xdata=0 code=1909
target not created
build time collapsed: 00:00:00
Wed Sep 05 2018, 08:44 PM
#13
Here is a full project.
It definitely generates a hex file.
Let me know when you have tried it.
Attachment
Thu Sep 06 2018, 03:34 AM
#14
i tired now sir when i have debugged the program it is showing error 56: cant open file
Thu Sep 06 2018, 04:18 AM
#15
Sorry sir this coding when i am translating the current file then it is showing no errors but when i am trying to building the target and rebuild it. It is showing target not created. please help me out from this problem as i am running short of time
Thu Sep 06 2018, 05:19 AM
#16
Post your code.
Use a fake phone number for now.

Also post a screen shot or photo of the compilation message.

If you want to, send me your phone number in a a private message
and I will create the hex file for you.


[ Edited Thu Sep 06 2018, 06:47 AM ]
Thu Sep 06 2018, 12:37 PM
#17
this is the code:
Thu Sep 06 2018, 12:46 PM
#18
this is my error in kiel u vision 5



Thu Sep 06 2018, 12:47 PM
#19
this is my code
Thu Sep 06 2018, 12:48 PM
#20
the code is same as u sent me for 16 chars

Get Social

Information

Powered by e107 Forum System

Conversation

Tue Jul 23 2019, 08:33 AM
Constance Sutherland
ss内容ss
ExperimenterUK
Thu Jul 11 2019, 07:55 PM
@ramos https://www.theengineeringprojects.com/2017/09/l298-motor-driver-library-proteus.html
ExperimenterUK
Thu Jul 11 2019, 07:44 PM
@praveen123. Can you give a link to the project ?
Thu Jul 11 2019, 04:47 PM
ramos
buenos dias alguien podria ayudarme necesito saber como descargar la libreria del l298n para proteus
Thu Jul 11 2019, 11:11 AM
praveen123
anyone can help me
Thu Jul 11 2019, 11:11 AM
praveen123
i need source code for 8051 -smart trolley rfid
Thu Jul 11 2019, 11:10 AM
praveen123
hii
ExperimenterUK
Thu Jun 27 2019, 09:14 PM
Hi.. good to see you again
۞ TPS ۞
Thu Jun 27 2019, 07:31 AM
Hello
AdiGhazi
Tue Jun 18 2019, 11:21 AM
Hlo Dear , I've to program AT89C51AC3 RT-LUM using flip but I'm getting time out error for RS232. Will you please suggest me which programmer will be supportable to program this Chip.

Downloads

Comments

3AAPC
Sun Jul 21 2019, 12:41 AM
rpels7707
Fri Jul 19 2019, 11:31 AM
ameya123
Fri Jul 19 2019, 07:36 AM
anhsieuno
Thu Jul 18 2019, 11:39 AM
zxcvbnm1234
Sat Jul 13 2019, 07:09 AM
surajghayal
Wed Jul 10 2019, 01:17 PM
figureyang
Fri Jul 05 2019, 04:25 AM
mousompal
Sat Jun 29 2019, 05:02 PM

Online

Guests: 59, Members: 0 ...

most ever online: 182184
(Members: , Guests: 182184) on 06 Aug 2010: 05:37 AM

Members: 38081
Newest member: 3AAPC
Forum Activity
3AAPC Avatar
Posted By 3AAPC
Sun Jul 21 2019, 12:51 AM
3AAPC Avatar
Posted By 3AAPC
Sun Jul 21 2019, 12:47 AM
With the GPS antenna in the outdoors, I use the ub...
ameya123 Avatar
Posted By ameya123
Fri Jul 19 2019, 07:42 AM
Hello,Please share 8051 Assembly language code for...
figureyang Avatar
Posted By figureyang
Fri Jul 05 2019, 04:37 AM
here is the source code prepared for you download ...
figureyang Avatar
Posted By figureyang
Fri Jul 05 2019, 04:30 AM
Cheap_Flash_FS(Normal Version)--Embedded FAT16/32 ...
wimac Avatar
Posted By wimac
Sat Jun 22 2019, 01:26 PM
I’ve use the AT89C51ED2 which has a similar progra...
ExperimenterUK Avatar
Posted By ExperimenterUK
Thu Jun 20 2019, 10:08 PM
baud rate is 9600 at stop bits of 2. AdiGhaziThe u...
AdiGhazi Avatar
Posted By AdiGhazi
Thu Jun 20 2019, 05:24 AM
Dear,I'm using RS232 serial port cable to use flip...
ExperimenterUK Avatar
Posted By ExperimenterUK
Tue Jun 18 2019, 10:19 PM
Okay.. I have never programmed the AT89C51AC3 or ...
AdiGhazi Avatar
Posted By AdiGhazi
Tue Jun 18 2019, 11:20 AM
Hlo Dear ,I've to program AT89C51AC3 RT-LUM using ...