Discussion in "Project Help" started by    sifirsekiz    Dec 12, 2018.
Wed Dec 19 2018, 06:27 PM
#11


Nobody knows?

sifirsekiz


The problem is that you are asking for a complete project.
If no one here has done that, we can't provide one.
I can't find any on the Web either.

As we don't have a working project you would have to build it.
We have projects that use an 8952 and an LCD that could be adapted.
We have code for IC2 but it would need changes to use the Max30100.
We/you would then need to adapt Max30100 software from the web to get results.

There is a lot that could go wrong.
A working project is usually the result of a lot of trial and error.

Getting useful results is complicated and as I/we have
no experience with this chip,you could end up getting stuck
with a non-working project.


Do you have a working 8952 and LCD board?
Have you done much programming ?


[ Edited Sat Dec 22 2018, 12:30 AM ]

Get Social

Information

Powered by e107 Forum System

Conversation

ExperimenterUK
Mon Jan 07 2019, 11:31 AM
@REVOCATUS please post in the AVR forum
Mon Dec 24 2018, 05:25 PM
REVOCATUS MATEMU
sorry I mean referee boards for player substitution
Mon Dec 24 2018, 05:24 PM
REVOCATUS MATEMU
hi am.looking how to build referee by using Atmega 328 and its codes
Sat Dec 15 2018, 09:45 PM
Arslan ayoub
Hii ,, can I get the simulation of numeric keypad lock on proteus
ExperimenterUK
Tue Dec 04 2018, 01:17 AM
Please post questions in the forum. The chat box is for chat
Mon Dec 03 2018, 02:43 PM
help!me!
help! I don't understand busy flag!
Mon Dec 03 2018, 04:01 AM
ile
hello
Mon Nov 12 2018, 01:58 PM
Pavan_user
i have seen your replica of I2C programming using AT89C51 but i am unable to understand the "ack_bit" variable usage ...looks like it is always 1...can you elaborate how acknowledgment is working....
bgk3678
Tue Nov 06 2018, 10:36 PM
kindly any one give solution for my problem
ExperimenterUK
Tue Nov 06 2018, 05:48 AM
Pins high is the normal state. You need a program to set them low

Downloads

Comments

SONACHAI1234
Sun Jan 06 2019, 08:14 AM
manan.gulyaani
Tue Jan 01 2019, 07:58 AM
etech
Sun Dec 30 2018, 07:44 PM
NeilC
Sun Dec 23 2018, 07:39 PM
darkgonzo
Fri Dec 21 2018, 08:30 AM
Sajid86
Wed Dec 19 2018, 04:54 AM
zhangd1v4bh1
Tue Dec 18 2018, 06:02 AM
mauste
Thu Dec 13 2018, 01:52 PM

Online

Guests: 53, Members: 0 ...

most ever online: 182184
(Members: , Guests: 182184) on 06 Aug 2010: 05:37 AM

Members: 38035
Newest member: SONACHAI1234
Forum Activity
ExperimenterUK Avatar
Posted By ExperimenterUK
Sun Jan 06 2019, 10:37 PM
Which 8051 chip are you using ?
SONACHAI1234 Avatar
Posted By SONACHAI1234
Sun Jan 06 2019, 08:21 AM
Hi,By mistakenly i burn rx program in my 8051 micr...
ExperimenterUK Avatar
Posted By ExperimenterUK
Wed Dec 19 2018, 06:27 PM
Nobody knows?sifirsekizThe problem is that you are...
sifirsekiz Avatar
Posted By sifirsekiz
Wed Dec 19 2018, 12:15 PM
sifirsekiz Avatar
Posted By sifirsekiz
Sun Dec 16 2018, 11:13 PM
Guys pleaseeeee :((
sifirsekiz Avatar
Posted By sifirsekiz
Sat Dec 15 2018, 07:09 PM
HiThe pulse-sensor-amped has an analogue output.Th...
ExperimenterUK Avatar
Posted By ExperimenterUK
Sat Dec 15 2018, 07:01 PM
HiThe pulse-sensor-amped has an analogue output.Th...
sifirsekiz Avatar
Posted By sifirsekiz
Sat Dec 15 2018, 09:02 AM
and ı have pulse sensor one out but anolog use 805...
sifirsekiz Avatar
Posted By sifirsekiz
Sat Dec 15 2018, 08:56 AM
HiMembers can supply code and diagrams if they wan...
ExperimenterUK Avatar
Posted By ExperimenterUK
Fri Dec 14 2018, 11:54 PM
HiMembers can supply code and diagrams if they wan...