Discussion in "Chill out!" started by    Ûž TPS Ûž    Aug 29, 2009.
Fri Nov 05 2010, 01:23 am
#11
I came to know about controllers during my engineering course in yr 2005. but i did not work too much on then just had thoughts about controller. at that time controller was just a dream.

It was end of 2005 when i actually touched an 8051 hehe i was so happy u know. and then working late nights on 8051, really made me a skilled programmer and a hardware designer too. no doubt i spent a lot of time with hardware mostly nights coz day time lab was fully occupied. i used to work alone in night.

If you ask me how fast? lol! i say 4 months or less hehe.. but yes i was just a programmer and i learn over time to become a skilled programmer. even today when i do something new i understand and learn. so learning phase never ends.. i learn a lot from you people too
Fri Nov 05 2010, 02:22 am
#12
If not a secret, what you are doing when you arent helping us, with our projects ? Are you hardware/software developer or what is your job ? If not a secret of course
Sat Nov 06 2010, 12:53 am
#13
I am working as an embedded software engineer
Mon Nov 08 2010, 02:53 am
#14
wow ajay.!! i will do sleepless night also doing programming.. hehe

i want to have a great knowledge also like u...


@ majoka, if u dont mind tell ur story also.. hehe
Mon Nov 08 2010, 10:20 am
#15
hi romel_emperado
my story is simple i mostly work at night during my engineering i start work on controller almost when my 5th semester end this site has a contribution in my learning process too i jush has a pond of learning micro controllers i make projects of my friends during semesters because they do not want to make so they assign me so gradually i get experience in this field
i feel on thing that where ur sincere with urself and want to do some thing then every thing is possible many thing that was difficult for me at that time but now that r simple one
my programming is not good still i remember i often not sleep at nights and i spend 4 days on my first push button program that was 5 to 6 lines only i just placing a line above one condition that shold be below this was the mistake.
i start with asm then switch to c with respect to time.
 romel_emperado like this.
Mon Nov 08 2010, 10:43 am
#16
Great story too majoka.
in my case i am only an electronics student. I learned C programming in my own, i just studied some topic in www.cprogramming.com thats y i have few knowledge in C.

I got interested in Micros and i enrolled the subject but we are not taught with micros. my teacher had just let us choosed what to passed microcontroller project at the end of the semester.. on that time i spent most of my time studying with micros. i always asked www.google.com evrything to know somthing in micros. I registered in www.8051projects.info i see some projects but there is no complete turtorial there and i soldered my choosen project from there site but it never worked and the author dont answer the queries of the members..:D And then i found www.8051projects.net and majoka helped me with my first microcontroller project.. thats y I am her now learning i could possibly be learned.


[ Edited Mon Nov 08 2010, 10:48 am ]
Mon Nov 08 2010, 10:51 am
#17
hi romel_emperado
mirco learning is not difficult it is so simple
if u get time then read a mazidi book when u overview all book then u will feel that u has a knowledge on it then just there is a need of practice
" practice makes man perfect "
i am also an electronic student i also learn this on my own interest i read some c books i also read books on vb because when u work on micro often need to interface it with pc so in pc u need a custom software like GUI so now i make my own GUI's for my purpose
 romel_emperado like this.
Mon Nov 08 2010, 11:03 am
#18
thanks majoka.. i will read the mazidi book..

i think i need an hour rest because my eyes is hurt of all day all night looking my full of errors codes.. hehe



[ Edited Mon Nov 08 2010, 11:05 am ]
Mon Nov 08 2010, 06:26 pm
#19
there are other stories too...
one of the first inspiration Ajay got from I-net was to make a site.. and we all are lucky to be part of this website.

use and misuse of anything is upon your own will. You need to decide if you want to sell tomatoes or clean tables.
Mon Nov 08 2010, 08:15 pm
#20
Thanks shyam.. and i am lucky that u are part of it and not to forget Shailesh

I started my career with your and Shailesh's efforts. I am always thankful for that.

Get Social

Information

Powered by e107 Forum System

Downloads

Comments

Marcusedine
Mon Nov 11 2024, 09:35 am
JohnCapse
Mon Nov 11 2024, 04:01 am
Massoenurf
Sun Nov 10 2024, 07:50 pm
Jerrysig
Sun Nov 10 2024, 01:38 pm
Thomascudge
Sun Nov 10 2024, 06:19 am
Emilioevets
Sun Nov 10 2024, 03:27 am
Cazrgll
Sat Nov 09 2024, 11:45 pm
Anya79sa
Sat Nov 09 2024, 07:52 pm