real time clock using at89c4051
Discussion in "Project Doubts" started by anu Mar 4, 2007.
Sun Mar 04 2007, 11:25 am
1.applications of rtc.
2.objectives of this project.
3.in block diagram each block explanation.
4.if the guide will ask me why you choose thic project what answer i should say.
2.objectives of this project.
3.in block diagram each block explanation.
4.if the guide will ask me why you choose thic project what answer i should say.
Sun Mar 04 2007, 04:02 pm
1.applications of rtc.
Anywhere you can make a timer control circuit etc.
A simple clock
or a time keeper circuit.. it depends on you how you want to use it.. and where you want to use it.
2.objectives of this project.
Implement I2C communication, and to send and receive data from an I2C device. in this case its an RTC.
3.in block diagram each block explanation.
that you have to do...
there are not too many blocks!!
one is LCD, second is controller and last is RTC. see the datasheets and you can write anything about these on your behalf
4.if the guide will ask me why you choose thic project what answer i should say.
To Understand and implement the Inter IC communication.
To make use of a RTC and successfully make a working clock for demonstration of I2C communication.
Understand LCD and its interface with a Microcontroller.
I hope these answers will help you
Powered by e107 Forum System