Discussion in "Electronics" started by    nisargpatel    Jul 1, 2014.
Tue Jul 01 2014, 11:34 am
#1
Hi

does any one have idea to design flyback transformer used in SMPS.....? winding details core selection etc.
Fri Jul 04 2014, 03:37 am
#2
It's a very big and complicated subject.
I think you need to be prepared to do a lot of reading.

If you have a specific question one of our members may be able to help.

Sat Jul 05 2014, 12:11 pm
#3
[Topic moved to Electronics forum]
Mon Jul 07 2014, 02:27 pm
#4
yes i know that its a big topic but i have read lots of things related to that, for that there are lots of manufacturers have give their application notes like microsemi, maxim, fairchild, international rectifiers etc

the main thing is core selection and winding details , in winding details there is complex calculations and above all have given that calculation in their app notes but their equations are different , the parameter consideration is different

so problem is that what are the minimum things i have to take in account for winding details...

further more ideally for flybacks 1 volt = 1 turn ..........but as we know its IDEALLY ......! NOT PRACTICALLY

Get Social

Information

Powered by e107 Forum System

Downloads

Comments

Bobbyerilar
Thu Mar 28 2024, 08:08 am
pb58
Thu Mar 28 2024, 05:54 am
Clarazkafup
Thu Mar 28 2024, 02:24 am
Walterkic
Thu Mar 28 2024, 01:19 am
Davidusawn
Wed Mar 27 2024, 08:30 pm
Richardsop
Tue Mar 26 2024, 10:33 pm
Stevencog
Tue Mar 26 2024, 04:26 pm
Bernardwarge
Tue Mar 26 2024, 11:15 am