Discussion in "ARM Development" started by    sachinmm    Sep 14, 2015.
Mon Sep 14 2015, 05:20 AM
#1
hello sir,i have a sm20 finger print module and i want to write an application for interfacing sm20 module with lpc2148 but plz tell me how to check my sm20 finger print module is working or not??? i have serial port terminal software..
Tue Sep 15 2015, 12:52 AM
#2
I found this data sheet that seems to cover your model.
As commands are 24 bytes long and not in ASCII you can't do a simple test.
Write a program to send a command string and check the reply.

 sachinmm like this.
Tue Sep 15 2015, 06:26 AM
#3
thanku sir my module is working
Tue Sep 15 2015, 06:27 AM
#4
but there is one issue i used lpc2148 trainer board for interfacing fp..in that pin.0.8 showing 0 voltage and i cant get proper response from fp
Tue Sep 15 2015, 06:31 AM
#5
pin 0.8 and pin 0.9 are used for receive and transmit data for UART1....and i used UART0 for transmitting data and uart1 used for showing response from fp....
Sun Sep 20 2015, 09:12 PM
#6


but there is one issue i used lpc2148 trainer board for interfacing fp..in that pin.0.8 showing 0 voltage and i cant get proper response from fp

sachinmm


Are you still having problems ?
Mon Sep 21 2015, 04:37 AM
#7
yes sir..
Mon Sep 21 2015, 04:39 AM
#8
because FP data is reading by using UART1 and TX AND RX pin of uart1 is connected to pin0.8 & pin0.9 and TX show 0 volt.
Wed Sep 23 2015, 01:04 AM
#9
Can you give a link to the lpc2148 trainer board you are using.

Are you able to program the board to do anything ?
Do you have any demo software that transmits on UART1 ?

Tue Sep 29 2015, 09:31 PM
#10
[Topic moved to ARM Development Forum]

Get Social

Information

Powered by e107 Forum System

Conversation

Sun Sep 27 2020, 04:55 PM
Aleida
side effects levitra vs cialis http://cialistores.com - buy cialis online cheap cialis commercial models does generic cialis work forum canadian cialis buy cialis nz
Sun Sep 27 2020, 03:36 PM
Waldo Avalos
MORE INFO=> https://bit.ly/2ZsKQsz
Sun Sep 27 2020, 08:38 AM
Bryanslj
only
Sun Sep 27 2020, 07:06 AM
Edgar Sharrow
Want no charge advertising for your website? Check out: http://bit.ly/post-free-ads-here
Sat Sep 26 2020, 07:27 PM
Ronald Withrow
This software will help to increase traffic to website to hundreds, thousands times.
Thu Jun 11 2020, 06:27 AM
anudee
sir could please send the code for I2C and wifi interfacing with 8051
scena
Tue May 19 2020, 10:29 PM
Does anyone have microcontroller programming software for STC15F104W (core 8051, 4 k, 128 byte, 6 I/O pin, UART ... DIL8), that works?
Sat May 02 2020, 07:38 PM
Tamu Gurung
Hi I am looking for a assembly language program for a digital decimal counter. Time counts max limit of 2 mins starting from 2.00 mins and ending at 0.00. time is to be displayed on 4 7-segment LED displays. Edsim51 simulator to be used. Thanks
Wed Mar 25 2020, 01:39 PM
Tajammul
Sir kindly send the code file i2c for 8051
ExperimenterUK
Fri Mar 13 2020, 10:36 PM
@ Rohitnani,ABEBE..which project ?

Downloads

Comments

Mirza123
Thu Jun 25 2020, 03:46 PM
eunicelove124
Mon Jun 22 2020, 03:03 PM
cerouno
Tue Jun 16 2020, 05:10 PM
Marce
Sat Jun 13 2020, 09:43 PM
Davidthils
Thu May 21 2020, 12:44 PM
Jakeror
Thu May 21 2020, 01:28 AM
motorCar
Wed May 20 2020, 07:05 PM
Vordrync
Wed May 20 2020, 11:52 AM

Online

Guests: 82, Members: 0 ...

most ever online: 182184
(Members: , Guests: 182184) on 06 Aug 2010: 05:37 AM

Members: 38215
Newest member: Mirza123