8051 college bell with multiple alarm
Discussion in "New Ideas regarding projects" started by ugoo5000 Jan 29, 2017.
Sun Jan 29 2017, 11:05 pm
i got this project from http://www.8051projects.info/resources/automatic-college-school-bell-timer.4/ i have design the project in Proteus 8.0 but the keyboard connection is not working on the micro controller,i mean the key board has no effect on the lcd, pls can some one help me reconnect it
Wed Feb 01 2017, 03:22 am
I looked at this project.
I get lots of errors from Proteus about read timings,
and the keyboard is not read at all.
The keyboard code is so mixed up with reading and writing the hardware
it is very hard to make out and debug.
If I were you, I would write my own code or try another project.
This is one of Binu's and some of his other projects had problems.
I get lots of errors from Proteus about read timings,
and the keyboard is not read at all.
The keyboard code is so mixed up with reading and writing the hardware
it is very hard to make out and debug.
If I were you, I would write my own code or try another project.
This is one of Binu's and some of his other projects had problems.
Thu Feb 09 2017, 11:26 pm
did you have a project that can replace the workability of the college bell timer, i need an aid pls. is there any thing that can be done to modify the keypad to work?
Fri Feb 10 2017, 01:44 am
is there any thing that can be done to modify the keypad to work?ugoo5000
Honestly I don't think it is worth trying.
Binu projects often don't work, so even if you/I get the keyboard
working something else will need fixing.
did you have a project that can replace the workability of the college bell timer, i need an aid pls.ugoo5000
I did a Google search for "college bell 8051 " and got several hits.
I'm sure you can find a good project that is right for you.
Powered by e107 Forum System