GR-1 Based Home-made Jet engine

gr-1 based jet Engine, home made jet engine, gas turbine engine





WARNING ! This project is posted for entertainment value only! Do not attempt to re-create this project unless you are aware of the possible danger associated with this type of project. Rickey's World is not responsible for damages or injury resulting from the information posted in these pages!


Our Home-made Jet Engine is based on the GR-1 Jet Engine design by RCDON. Me and my brother made this project after getting inspired from the RCDON design. Well as we all know that getting the same HI-FI stuff in india is not that simple so.. we made our design a bit modified, but the basic stuff remains the same.

Talking about the design requirement, there are very few requirements of our design. We have designed the whole Jet Engine from the scrap which is quiet cheap and easily available.

The heart of the jet engine is Turbo Charger you can get information on turbocharger on Google.
so we got the turbocharger from market, yes an old Turbo-chager from a Truck. Then the first think we had to do with it is cleaning and making it right to work.

second thing was to make a combustor design. the design is very similar to the GR-1 Design. and the last thing is, ignition circuit and gas cylinder.

WARNING! Please dont try dealing with the LPG Gas unless you know what you are doing.

so lets take a look at the work we did for making this project a reality.
Cleaning the Turbocharger
Combustor Design
Power Supply Design
Test Run Video - Page 1

Test Run Video - Page 2


Next Page >>

Conversation

shshistiem
Wed Sep 12 2018, 10:58 PM
hii!! some1 please let me know how i ll get rfid code to 8051 by WEIGAND mode
DrNossberg
Tue Sep 11 2018, 08:09 PM
is there anyone here?
Mon Aug 27 2018, 07:30 AM
bun
Hello everyone´╝ü
Sat Jul 21 2018, 06:21 AM
Dibakar Bhanja Chowdhury
By using a 555 timer how can I expand the range of the mobile phone jammer? Please reply me asap
Sun May 20 2018, 10:01 AM
justinb
how to write and execute a program that read the keypad button and display the number on 7 segment on intel8051 at89s52 in assembly language?
Thu May 17 2018, 06:36 AM
HAMZA TAJ
sir iwant to ask about controller of three phase supply by using back to back thyristor instead of triac....will u give me some guideline?
Sat Apr 28 2018, 12:54 PM
ashutosh jain
IR Remote Switch using TV remote (RC5 Protocol) is not working properly. opp1 & opp2 is in problem.plz help
ExperimenterUK
Fri Apr 27 2018, 08:09 PM
@kaiserslautern Post in forum
Wed Apr 25 2018, 07:09 AM
kaiserslautern
Hello everyone, using software uart is a very good idea for a second serial port. Thank you so much. I would kindly like to know how to connect this port to the PC?
ExperimenterUK
Sat Apr 21 2018, 07:50 PM
This is a community site. Feel free to help anyone needing advice

Downloads

Comments

PCBindex
Fri Sep 14 2018, 02:45 AM
sirkit
Thu Sep 13 2018, 04:46 AM
shshistiem
Wed Sep 12 2018, 10:36 PM
DrNossberg
Tue Sep 11 2018, 03:25 PM
ranjanvh
Thu Sep 06 2018, 02:28 PM
rbbhamre
Tue Sep 04 2018, 06:15 PM
Tressie
Sun Sep 02 2018, 02:20 PM
Sudhansudeep
Fri Aug 31 2018, 08:26 AM

Online

Guests: 53, Members: 0 ...

most ever online: 182184
(Members: , Guests: 182184) on 06 Aug 2010: 05:37 AM

Members: 38006
Newest member: PCBindex
Forum Activity
ExperimenterUK Avatar
Posted By ExperimenterUK
Thu Sep 13 2018, 08:39 PM
First of all, by reading your reply, I abandoned m...
DrNossberg Avatar
Posted By DrNossberg
Thu Sep 13 2018, 03:49 PM
Hi, thanks you for your reply ^^ First of all, by ...
ExperimenterUK Avatar
Posted By ExperimenterUK
Wed Sep 12 2018, 12:12 AM
HiThere are several issues here.The original 8051 ...
DrNossberg Avatar
Posted By DrNossberg
Tue Sep 11 2018, 08:08 PM
Hello everybody!First of all let me explain some s...
ExperimenterUK Avatar
Posted By ExperimenterUK
Fri Sep 07 2018, 05:08 AM
The compiler thinks the micro doesn't have enough...
Sudhansudeep Avatar
Posted By Sudhansudeep
Fri Sep 07 2018, 02:59 AM
this is the build output message
Sudhansudeep Avatar
Posted By Sudhansudeep
Fri Sep 07 2018, 01:38 AM
Change the mobile number as [number removed] in t...
ExperimenterUK Avatar
Posted By ExperimenterUK
Thu Sep 06 2018, 08:56 PM
I don't know what the problem is, I get no errors....
Sudhansudeep Avatar
Posted By Sudhansudeep
Thu Sep 06 2018, 01:12 PM
the code is Attachment ...
Sudhansudeep Avatar
Posted By Sudhansudeep
Thu Sep 06 2018, 12:48 PM
the code is same as u sent me for 16 chars