These posts by DaveChika have received thanks:
| How can i Extract Sms Message From AT command response |
| @majoka, i tought you said you receive sms but it does not give you new sms notifications. from the above diagnosis by Ajah, your modem has no signal strenght. going by this extract below AT+CSQ Signal Qu... |
| Thanked 1 time Posted by DaveChika on |
| How can i Extract Sms Message From AT command response |
| @majoka if you are using SIM300D, then try this setting " AT+CNMI=2,2,0,0,0\r " // notification of new sms 2 = Buffer unsolicited result codes in the TA when TA-TE link is reserved (e.g. in on-line data m... |
| Thanked 1 time Posted by DaveChika on |
| How can i Extract Sms Message From AT command response |
| Hello for those of you viewing this thread from start,here is the software that enables you to simulate your protues from keil environment,i.e you can control your debugging on protiues from keil,jus... |
| Thanked 2 times Posted by DaveChika on |
| How can i Extract Sms Message From AT command response |
| @majoka, yes you can use Protues compim to interact with your physical serialport of your pc,your COMPIM (COM port Physical Interface Model) can be used to bring real world data into a VSM simulati... |
| Thanked 1 time Posted by DaveChika on |