nokia 1100
Mon Jun 15 2009, 01:58 pm
hi frnz..! :-)
i want to interface nokia 1100 wid microcontrollers (any core) in future..
for dis i've to 1st connect nokia 1100 wid my computer..
i've a serial cable for nokia 1100 n a USB to serial cable as my computer does not ve a serial port..
wen i try to check my connections in hyperterminal by typing "AT" it is showin "NO CARRIER"...
i hope u'll help me out wid dis..
thanks in advance..
i want to interface nokia 1100 wid microcontrollers (any core) in future..
for dis i've to 1st connect nokia 1100 wid my computer..
i've a serial cable for nokia 1100 n a USB to serial cable as my computer does not ve a serial port..
wen i try to check my connections in hyperterminal by typing "AT" it is showin "NO CARRIER"...
i hope u'll help me out wid dis..
thanks in advance..
Mon Jun 15 2009, 02:29 pm
now i m able to connect it..i m getting an "OK" after typing "AT"..
wat next..?which AT commands i should try..?
wat next..?which AT commands i should try..?
Fri Jun 19 2009, 08:07 am
hi ajay..!
i m not able to connect to my phone now...actually last time i did some settings in hyperterminal n my phone got connected to my lappi..but i did not save dat connection..now i m not able to connect to my phone n forgot d settings as well..
could u pls tell me d different settings in hyperterminal
i.e. shall i use country code/area code while dialing,..etc...etc..
i m not able to connect to my phone now...actually last time i did some settings in hyperterminal n my phone got connected to my lappi..but i did not save dat connection..now i m not able to connect to my phone n forgot d settings as well..
could u pls tell me d different settings in hyperterminal
i.e. shall i use country code/area code while dialing,..etc...etc..
Fri Jun 19 2009, 11:48 am
hi rushi
i am also like to interface mobile with controller but i dont lnow atcommands
but this method for checking is too good
rushi can you give me information regarding cable u used for connecting nokia1100 with computer
i am also like to interface mobile with controller but i dont lnow atcommands
but this method for checking is too good
rushi can you give me information regarding cable u used for connecting nokia1100 with computer
Fri Jun 19 2009, 04:27 pm
hi kamesh..!
i m also quite new to these AT commands n all..
but i can tell u bot d serial cable i m using...
just ask for a serial cable for nokia 1100,i hope u'll get it in d market...
if u open d battery cover of nokia 1100 u'll find 4 contacts available on its PCB for connection...this serial cable has DB9 connector on one side and 4 contacts on the other end are going to the PCB of the mobile...
keep in touch n let me know ur progress...
i m also quite new to these AT commands n all..
but i can tell u bot d serial cable i m using...
just ask for a serial cable for nokia 1100,i hope u'll get it in d market...
if u open d battery cover of nokia 1100 u'll find 4 contacts available on its PCB for connection...this serial cable has DB9 connector on one side and 4 contacts on the other end are going to the PCB of the mobile...
keep in touch n let me know ur progress...
Fri Jun 19 2009, 09:56 pm
if u open d battery cover of nokia 1100 u'll find 4 contacts available on its PCB for connection...this serial cable has DB9 connector on one side and 4 contacts on the other end are going to the PCB of the mobile...RUSHI D.
This sounds like an "F-bus" connector.
Like Ajay, I'm surprised the 1100 supports AT commands.
As for Hyperterminal..in the "Connect to" box,
if you select Com 1 (or whatever you are using) in the "Connect using" field.
You don't need to setup phone numbers etc.
Powered by e107 Forum System