Automatic room lights

Looking at the data sheet, the AT89c52 needs a parallel programmer to set up the address and data lines.

The AT89s52 can programmed the same way , but can also be programmed in serial mode just using
MOSI, MOSO and SCK.

what software i used to burn the hex file? i already have the USB part which is used to connect to the AT89S52..

Ginger92

This may be a problem.
You might find software on the net that will work, but it might not work if it does not
recognise the signature of the USB device in your programmer.

Where did your programmer come from ?

There are many designs for serial programmers on the net to make yourself.
They usually recommend software to use with it.