Propeller Display using AT89C2051
Thu Oct 14 2010, 10:14 am
hi vssmartboy
try this code i edit it according to keil instead of RIDE
try it and tell
yes that r only resistors u can use any type as ua want individually or in the form of array
try this code i edit it according to keil instead of RIDE
try it and tell
in place of 470ohm resistive ntwrk can i use individual 470ohm resistance?
yes that r only resistors u can use any type as ua want individually or in the form of array
vssmartboy like this.
Thu Oct 14 2010, 05:10 pm
Thank u very much MAJOKA bro for help,bro plz make hex and asm file of this project code in keil with text "LOVELY INSTITUTES(LIT)"...
Thu Oct 14 2010, 06:05 pm
MAJOKA bro i read ur program which u made for me..thanx..u only changed letters frm propeller display to lovely inst..bro plz tel how u create .hex file in keil..and tell can i display anything by replacing letters..plz tel the steps to create .hex file of this code in keil..thnx again
Thu Oct 14 2010, 06:06 pm
hi!
there is no available moc7811 here in our country so I substituted it with a photo-transistor(wpt 440f) and an IR diode set up such that an interrupt occurs when the phototransistor detects the IR.
How can I invert the interrupt? for example, when the transistor detects and IR signal, it will go high.
there is no available moc7811 here in our country so I substituted it with a photo-transistor(wpt 440f) and an IR diode set up such that an interrupt occurs when the phototransistor detects the IR.
How can I invert the interrupt? for example, when the transistor detects and IR signal, it will go high.
Thu Oct 14 2010, 08:34 pm
hi laichee
normally photo transistor goes low when it detect light u can add a npn transistor to invert it further or u can use a not gate also to invert it
exact diagram is in the project zip file u can see that that also inverting a logic ru see that
normally photo transistor goes low when it detect light u can add a npn transistor to invert it further or u can use a not gate also to invert it
exact diagram is in the project zip file u can see that that also inverting a logic ru see that
Thu Oct 14 2010, 08:41 pm
hi vssmartboy
the original project coding is in RIDE IDE
to edit in keil is not so difficult
ist line of including 8051 file u have to remove that in keil and compile it
edit the message as u want and compile it
hex file is created now according to new code
tell me ever u built any project in keil or not
then i guide u according to that
the original project coding is in RIDE IDE
to edit in keil is not so difficult
ist line of including 8051 file u have to remove that in keil and compile it
edit the message as u want and compile it
hex file is created now according to new code
tell me ever u built any project in keil or not
then i guide u according to that
Thu Oct 14 2010, 08:51 pm
Aslamwalaikum bro..No majoka bro,its my first project in keil or embedded..bro can u made a program who can display clock rather than any text.. And plz also made program in C of that program u made for me..
Thu Oct 14 2010, 08:57 pm
ur talking for the same project or another clock that display it on simple 7-segments
Thu Oct 14 2010, 09:48 pm
Bro m talking about same project..if we wana display clock wid this project..
Thu Oct 14 2010, 09:56 pm
actually i do not see he detail coding of this project and i think it is in fact a clock because its title is propeller clock
Powered by e107 Forum System